> For some reason, floating network devices have stopped working after the
> upgrade from 3.8 to 4.0.5.
How was 3.8 ? Never tried since we release 4 right after 3.6.1 :)
> the port-security mac address violation is not received, thus no action is
> handled by PF.
You are sure about it ? The violation is coming before PacketFence can do
anything. What is the status of the port before plugging the floating device in
? provide a show run ?
> On the other hand, if the port of the floating network device is in access
> mode, the MAC is discovered.
There is no link between the two…
Can you paste more info about the log.
And a show run of the interface you are plugging a floating device in BEFORE
and AFTER.
Thanks
Cheers!
dw.
--
Derek Wuelfrath
[email protected] :: +1.514.447.4918 (x110) :: www.inverse.ca
Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence
(www.packetfence.org)
On 2013-08-29, at 9:44 AM, Andreas Calvo Gómez <[email protected]> wrote:
> For some reason, floating network devices have stopped working after the
> upgrade from 3.8 to 4.0.5.
> All floating network devices are configured to have a trunk port and allow a
> set of vlans in the port.
> However, when a floating network device with a trunk port is connected to a
> switch managed by PacketFence, the port-security mac address violation is not
> received, thus no action is handled by PF.
> On the other hand, if the port of the floating network device is in access
> mode, the MAC is discovered.
>
> But when PF tries to find the MAC in the switch, it complains with:
> Aug 29 15:18:03 pfsetvlan(15) WARN: couldn't get MAC at ifIndex 10039. This
> is a problem. (pf::SNMP::_getMacAtIfIndex
>
> Trying to run:
> /usr/local/pf/bin/pfcmd_vlan -switch 192.168.0.254 -ifIndex 10116 -getMAC
> -verbose 4
> show the same error:
> DEBUG - instantiating new SwitchFactory object
> DEBUG - creating new pf::SNMP::Cisco::Catalyst_2960 object
> DEBUG - start handling 'getMac' command
> WARN - couldn't get MAC at ifIndex 10116. This is a problem.
>
> Should a floating network device that will be multi-vlan have the port in
> trunk mode by default?
> Will PF configure the uplink port on the floating network device?
>
> If I force to finish the setup on the switch port (set the native vlan), the
> floating network device works as expected.
>
> Any hint?
>
> ------------------------------------------------------------------------------
> Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
> Discover the easy way to master current and previous Microsoft technologies
> and advance your career. Get an incredible 1,500+ hours of step-by-step
> tutorial videos with LearnDevNow. Subscribe today and save!
> http://pubads.g.doubleclick.net/gampad/clk?id=58040911&iu=/4140/ostg.clktrk_______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
Discover the easy way to master current and previous Microsoft technologies
and advance your career. Get an incredible 1,500+ hours of step-by-step
tutorial videos with LearnDevNow. Subscribe today and save!
http://pubads.g.doubleclick.net/gampad/clk?id=58040911&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
