> It's related, though, and good information to put in the archives for > the next person who has a problem. So as long as it's related, feel > free to ask. :)
That is correct :) Just a FYI, we are doing some little work on that side (NAS IP Address and stuff) in the PacketFence / FreeRADIUS code so that it will be more RFC compliant :) There are some minor edge cases in which we are not using the good IP address but that is not one of them ;) Cheers! dw. -- Derek Wuelfrath [email protected] :: +1.514.447.4918 (x110) :: www.inverse.ca Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence (www.packetfence.org) On Oct 22, 2013, at 2:27 PM, Jason Frisvold <[email protected]> wrote: > Morris, Andi wrote: >> Thanks Jason, >> I thought it might be, but I just needed to be sure as I couldn't see it in >> the config of the switch. >> >> I've tried the attribute 4 command on my switch (cisco 2950) but it doesn't >> recognise the command. I've since implemented the source-interface to be the >> vlan 1 address, and asked the user to try again. > > Could be for newer IOS releases too. I'd recommend searching your > config for the IP that you're seeing listed as the nas IP and see if > that shows up somewhere. It would appear that the switch IP is .10, but > .12 is what's being sent? > >> Anyway, as you said, this isn't a Packetfence thing, so I apologise for the >> noise and thank you for your help. > > It's related, though, and good information to put in the archives for > the next person who has a problem. So as long as it's related, feel > free to ask. :) > >> Cheers, >> Andi > > -- > --------------------------- > Jason 'XenoPhage' Frisvold > [email protected] > --------------------------- > > "Any sufficiently advanced magic is indistinguishable from technology.\" > - Niven's Inverse of Clarke's Third Law > > ------------------------------------------------------------------------------ > October Webinars: Code for Performance > Free Intel webinars can help you accelerate application performance. > Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from > the latest Intel processors and coprocessors. See abstracts and register > > http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk > _______________________________________________ > PacketFence-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/packetfence-users ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
