Hi Dan,
Try raising the loglevel for log4perl.category.pf.SNMP to at least INFO in
/usr/local/pf/conf/log.conf.
That should give you a bit more information to work with.
Regards,
--
Louis Munro
[email protected] :: www.inverse.ca
+1.514.447.4918 *125 :: +1 (866) 353-6153
Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence
(www.packetfence.org)
On 2013-11-15, at 14:20 , Dan Nelson <[email protected]> wrote:
> I have been using packetfence for years and had the remote sites working and
> now they are not working. I have been racking my brain to try and figure
> this out. I am running 3.6.1.
>
> In the Packetfence.log it shows but doesn’t switch the port over. I am using
> MAB authentication and I see it hitting the Radius server as well.
> Nov 15 12:14:24 pfdhcplistener(5100) INFO: DHCPREQUEST from MAC
> ADDRESS(192.168.68.10) (main::parse_dhcp_request)
> Nov 15 12:14:24 pfdhcplistener(5100) INFO: MAC ADDRESS requested an IP. DHCP
> Fingerprint: OS::100 (Microsoft Windows XP). Modified node with last_dhcp =
> 2013-11-15 12:14:24,computername = PCNAME,dhcp_fingerprint =
> 1,15,3,6,44,46,47,31,33,249,43 (main::listen_dhcp)
> Nov 15 12:14:24 pfdhcplistener(5100) INFO: MAC ADDRESS requested an IP. DHCP
> Fingerprint: OS::1113 (Palm OS). Modified node with last_dhcp = 2013-11-15
> 12:14:24,computername = ,dhcp_fingerprint = 1,3,6,15,44,46,47,66,67
> (main::listen_dhcp)
> Nov 15 12:14:24 pfdhcplistener(5100) INFO: MAC ADDRESS requested an IP. DHCP
> Fingerprint: OS::1113 (Palm OS). Modified node with last_dhcp = 2013-11-15
> 12:14:24,computername = ,dhcp_fingerprint = 1,3,6,15,44,46,47,66,67
> (main::listen_dhcp)
> Nov 15 12:14:26 pfdhcplistener(5100) INFO: 00:15:70:37:a1:ca requested an IP.
> DHCP Fingerprint: OS::1113 (Palm OS). Modified node with last_dhcp =
> 2013-11-15 12:14:26,computername = ,dhcp_fingerprint =
> 1,3,6,15,44,46,47,66,67 (main::listen_dhcp)
> Nov 15 12:14:32 pfdhcplistener(5100) INFO: 00:15:70:af:c7:cc requested an IP.
> DHCP Fingerprint: OS::1113 (Palm OS). Modified node with last_dhcp =
> 2013-11-15 12:14:32,computername = ,dhcp_fingerprint =
> 1,3,6,15,44,46,47,66,67 (main::listen_dhcp)
> Nov 15 12:14:33 pf::WebAPI(5367) INFO: handling radius autz request: from
> switch_ip => 192.168.68.2, connection_type => Ethernet-NoEAP mac =>
> 00:23:18:dc:3f:56, port => 50024, username => MAC ADDRESS
> (pf::radius::authorize)
> Nov 15 12:14:33 pf::WebAPI(5367) INFO: MAC: MAC ADDRESS is of status unreg;
> belongs into registration VLAN (pf::vlan::getRegistrationVlan)
> Nov 15 12:14:33 pf::WebAPI(5367) WARN: Role-based Network Access Control is
> not supported on network device type pf::SNMP::Cisco::Catalyst_3560G.
> (pf::SNMP::supportsRoleBasedEnforcement)
>
>
> If I manually put the port into the Reg vlan I get the captive portal.
>
> On the cisco 3560G switch I am getting
> Nov 15 19:12:38.072: %AUTHMGR-5-START: Starting 'mab' for client (MAC) on
> Interface Gi0/24 AuditSessionID C0A84402000000190102BD76
> Nov 15 19:12:38.265: %MAB-5-SUCCESS: Authentication successful for client
> (MAC) on Interface Gi0/24 AuditSessionID C0A84402000000190102BD76
> Nov 15 19:12:38.265: %AUTHMGR-7-RESULT: Authentication result 'success' from
> 'mab' for client (MAC) on Interface Gi0/24 AuditSessionID
> C0A84402000000190102BD76
> Nov 15 19:12:39.297: %AUTHMGR-5-SUCCESS: Authorization succeeded for client
> (MAC) on Interface Gi0/24 AuditSessionID C0A84402000000190102BD76
> Nov 15 19:12:39.624: %LINK-3-UPDOWN: Interface GigabitEthernet0/24, changed
> state to up
> Nov 15 19:12:40.631: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> GigabitEthernet0/24, changed state to up
>
> Something else interesting is that if I switch the device on the NODES to
> registered it does make the connection and switches the port via SNMP.
>
>
> Any help would be greatly appreciated.
>
> Thanks
> Dan Nelson
> Network Administrator
> Nutraceutical Corporation
> Office 801-334-3702
>
> ------------------------------------------------------------------------------
> DreamFactory - Open Source REST & JSON Services for HTML5 & Native Apps
> OAuth, Users, Roles, SQL, NoSQL, BLOB Storage and External API Access
> Free app hosting. Or install the open source package on any LAMP server.
> Sign up and see examples for AngularJS, jQuery, Sencha Touch and Native!
> http://pubads.g.doubleclick.net/gampad/clk?id=63469471&iu=/4140/ostg.clktrk_______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
DreamFactory - Open Source REST & JSON Services for HTML5 & Native Apps
OAuth, Users, Roles, SQL, NoSQL, BLOB Storage and External API Access
Free app hosting. Or install the open source package on any LAMP server.
Sign up and see examples for AngularJS, jQuery, Sencha Touch and Native!
http://pubads.g.doubleclick.net/gampad/clk?id=63469471&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
