I have to setup a packetfence infrastructure using a layer 2 cisco 2960. I have currently set it up in vlan enforcement mode. The vlan details which I have setup is as follows:
My packetfence server has 1 nic card with 3 sub- interface. The interface details of the server are as follows. eth0 - 10.10.0.253 eth0.2-VLAN 2 - Registration VLAN -172.16.110.1/24 eth0.3-VLAN 3 - Isolation VLAN - 172.16.120.1/24 I faced the following issues i configured 3 vlan switchport on the cisco 2950( vlan 1,2,3) and connected 1 host on each of the vlan. Each of the host were given IP address based on the vlan assigned to them hostA on vlan1 -10.10.1.113 hostB on vlan2 -20.20.0.113 hostC on vlan3 -30.30.0.113 host A is able to ping the eth0 ip address which is 10.10.0.253. but host B and host C are unable to ping eth0.2 and eth0.3 respectively. When I ping the interface i get a "request time" and a "destination host unreachable" message alternatively. The port that connects to the ESX server is a trunk port and the virtual NIC card of the packetfence server is capable of vlan tagging. What am i doing wrong? do I have to add an additional inline vlan. please do help me in this regard. Regards Vidur Ramnarayan ------------------------------------------------------------------------------ CenturyLink Cloud: The Leader in Enterprise Cloud Services. Learn Why More Businesses Are Choosing CenturyLink Cloud For Critical Workloads, Development Environments & Everything In Between. Get a Quote or Start a Free Trial Today. http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
