Louis, I have a Cisco 2960 and I am using MAB with radius deauth. I am running pf 4.1 on Centos 6.4.
-Jason -----Original Message----- From: Louis Munro [mailto:[email protected]] Sent: Monday, March 31, 2014 10:03 AM To: [email protected] Subject: Re: [PacketFence-users] After Registration Network Enable Fails Hi Jason, Please tell us more about your setup. To answer that question requires us to know which switch you have and which deauthentication method you are using. Regards, -- Louis Munro [email protected] :: www.inverse.ca +1.514.447.4918 *125 :: +1 (866) 353-6153 Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence (www.packetfence.org) On 2014-03-28, at 14:34 , "Decoursey, Jason B CADET MIL USA USMA" <[email protected]> wrote: Hello, Process: New machine connects and is assigned to the registration vlan via MAB > user registers > captive portal displays the enabling network loading bar > Connectivity Fails. What is going on in the background during that process? What I have seen in my tests is after the captive portal displays the enabling screen and the connectivity test fails, the user remains on registration vlan 12. On the Web Gui I can see the new unregistered user with the role of guest. I assumed that during the enabling screen on the captive portal PF is telling the switch to place the port on the guest vlan but it never changes from the registration vlan. Any help would be very appreciated. -Jason ------------------------------------------------------------------------------ _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users ------------------------------------------------------------------------------ _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
