Hi guys, I was hoping someone could give me a bit of guidance to get packetfence working correctly. My current LAN network is 192.168.0.0/24 and WAN branches are 192.168.1.0/192.168.2.0/192.168.3.0 etc etc so the way I configured Packetfence is as follows:
Eth0 Management 192.168.100.6 Eth1 InlineLayer 2 192.168.0.6 DNS 192.168.0.5 and DHCP on I have a pfsense firewall with IP Address of 192.168.0.5 which runs DHCP/DNS at present and I have added rules to allow internet access from 192.168.0.6 packetfence lan and I can open browser on the packetfence itself and browse OK. On a network machine I get network info from DHCP and I am getting 192.168.0.57 with gateway of 192.168.0.6 (packetfence) and DNS 192.168.0.6 (also packetfence). If I open a browser I get nothing. However if I change the Inline Layer to be registration instead then I get the registration page and can login but then get a 'Sorry' error from packetfrnce and no internet. My question is how should I configure the registration and inline layers, using what ip addresses to work with my lan gateway of 192.168.0.5 (pfsense box I mentioned)? Do I need to create a VLAn for the registration? If so on eth0 or eth1 and what IP range? Thanks heaps in advance. Regards, Scott. ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
