Hi All!
I'm looking at deploying PacketFence on one of the networks that I manage.
I've spun up a test instance of it on Ubuntu (12.04 from repository -
couldn't get ZEN to cooperate) and have had a decent amount of success so
far. I have run into a few issues, though.
1. Support for ProCurve 2810 - I see that the 2600 series is listed on the
website, but not the 2800 for supported switches. I have the 2800 mostly
working using the 2600 profile, I just can't get the port to change VLANs
after registration. I get the screen with the progress bar, but no VLAN
change ever occurs. If I manually unplug and replug my laptop, it picks up
the proper VLAN that time. Could I be missing something in my switch
configuration? I can provide the full config if needed.
1a. Possibly related to the same issue - When I opt to do the 10 minute
email verification option, I can stay on the Guest VLAN for as long as I
stay plugged in. The VLAN never gets changed back to the registration VLAN.
2. I was wondering if it would be possible for the "users" to be able to
specify what role their device gets assigned to. In this network, there are
no true "end users" - it's just me and any contractors or vendors that I
have installing equipment when I'm not able to be on site. If the vendors
could log in to PF from their laptop, punch in the MAC address, and choose
which role it should be (from a list I authorize), that would be SO helpful
instead of them having to send me the MAC addresses or giving them access
to the PF admin interface. I think from my reading this may be accomplished
by the gaming option or pre-registration, but I'm not 100% sure.
Please let me know what else you need from me. I appreciate any help you
can offer. Looking forward to success with PF!
Ross Lindsay
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
