You can do something like snmpwalk on the ifName Regards Fabrice
Le 2014-10-07 11:15, Scott Slagle a écrit :
I am setting up a new switch stack with PacketFence, how do I reference the uplink ports on the second switch in the stack in the switches.conf file?Switch 1 – uplinks are 25, 26, 27, 28 Switch 2 – uplinks are 25, 26, 27, 28 In the switch itself their referenced by: GigabitEthernet1/0/25, … GigabitEthernet2/0/25, … Thanks, Scott K. Slagle ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
-- Fabrice Durand [email protected] :: +1.514.447.4918 (x135) :: www.inverse.ca Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence (http://packetfence.org)
------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
