I am using Cisco 2960G's I have 24 Ethernet ports and 4 GigabitEthernet ports
All 4 GigabitEthernet ports are uplinks via fiber. Port 24 on Ethernet is uplink to main internet. I set the uplinks in packetfence to 24,25,25,27,28. vLan 1 is main network, vLan 20 is registration, vLan 99 is isolation. The switch is set to 802.1Q Trunk with Native Vlan 1 for uplink ports. Switch A has fiber uplink to Switch B via GigabitEthernet/0/1 respectively. If I reboot Switch B, Packetfence keeps changing the Native vLan on 25 (GigabitEthernet/0/1) to 20 causing Switch B to not be connected to the network. How do I keep this from happening? Thanks, Scott
------------------------------------------------------------------------------
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
