Boris, This config should be covered in the admin guide, at least it is for Cisco and port-security VLAN changes. The guide says to use the Voice VLAN interface command but we’ve inadvertently tested recently a trunk interface and PF switched the data Native VLAN on the trunk. I’ve done a lot of port-security straight up switch port, i.e. not VoIP, successful testing over the years in a lab environment (we’re still not production), but have been dragging my feet on testing Polycom VoIP attached PC’s, I guess the ‘VoIP attached PC dilemma’ has me procrastinating, i.e. the admin guides say the VoIP phone reboots on the VLAN change port bounce but the attached PC is said to not initiate DHCP’, I guess we’re hoping/reasoning that the attached PC’s change location/phone’s infrequently enough that we can live with manually forcing the PC to initiate DHCP by unplugging the cable or rebooting the machine. I really need to stop procrastinating and test this.
Steve CSM > On Mar 3, 2015, at 1:42 PM, Boris Epstein <[email protected]> wrote: > > Hello all, > > We use Polycom VOIP phones that have an ethernet bridge with an ethernet port > to plug your PC in. While that PC gets to communicate with the rest of the > network using its MAC address and the ARP table on the switch gets that MAC > address it is the Polycom phone's MAC address that PF gets. Strangely > enough,once you register it in the PF only the PC gets moved to the > appropriate production VLAN - the phone itself stays in the voice VLAN where > it belongs. But I really would like to see and operate with the PC's MAC > address. > > Has anybody attempted this sort of a setup? Any advice on how to proceed? > > Thanks. > > Boris. > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming The Go Parallel Website, sponsored > by Intel and developed in partnership with Slashdot Media, is your hub for all > things parallel software development, from weekly thought leadership blogs to > news, videos, case studies, tutorials and more. Take a look and join the > conversation now. > http://goparallel.sourceforge.net/_______________________________________________ > PacketFence-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/packetfence-users ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
