Hello Fabrice,
Thank you for your quick responded,
My LAN Cisco switches 2960 are almost using Version 12.2(44)SE6, does this
version enough condition to MAB configured?
And Core switches are 4500 model, Version 12.2(50)SG3.
I did as you recommended but after configuration radius on switch then i
can not log in to switch again, it asked Username, while i don't know that
:( .
How to use AD accounts to authenticate all users on Vlan123?(I own DNS, AD,
DHCP on windows server).
I also want to create a Vlan for guests with name Guest but can not change
type on web UI. This Vlan use for only guests when they come to work and
don't have account on our AD. Which is better method, condition, rules that
i have to look?
I hope you can explain more detail about Radius, using AD to authenticate
to me more clearly.
Any help is appreciated,
Best regard,
On 14 March 2015 at 20:49, Durand fabrice <[email protected]> wrote:
> Hello Minh,
>
> your packetfence config looks ok, now next step is to configure your cisco
> switch, so let's check the documentation:
>
> https://github.com/inverse-inc/packetfence/blob/devel/docs/PacketFence_Network_Devices_Configuration_Guide.asciidoc#cisco
>
> If your cisco switch support MAB then use it and let's configure only one
> port for the test.
>
> On the packetfence side add a new switch, select Voip enabled, configure
> the role (registration: 210, isolation: 220, voip: 124, default: 123),
> radius secret, snmp v2c and set the community read and write. (btw enable
> snmp on the cisco switch too).
>
> So now if you plug a device in the test switch port a radius request will
> go on packetfence server (radius server 10.126.122.27) and pf will answer
> the registration vlan (210).
> You will hit the portal (you can create a portal profile base with a
> filter like switch ip) and register on a authentication source and pf will
> return the vlan id based on the role the authentication source set based on
> the rules.
>
> For iphone, if you plug it in the switch port then packetfence will try to
> know if it's an ipphone by doing an snmp read on the cdp/lldp mib and if
> the flag is on then packetfence will answer a specific radius attribute to
> tell the switch to use the voip vlan configured on the switch port (switch
> port voice vlan 124).
>
> For printer you can create a violation based on the dhcp fingerprint, like
> if packetfence detect that it's a printer then register the device and set
> the role to printer (of course add a new category and assign the correct
> vlan id to the role in the switch config).
>
> For the wifi it's the same workflow (it depend of your AP) but if it
> support Mac auth then folow the configuration and create a portal profile
> with ssid filter = your ssid and add the sponsor source.
>
> Btw you will probably have to add a Active Directory auth source and set
> rule that will set a role as default , an access duration to 1W and add a
> Mark as Sponsor (for wifi sponsor).
>
>
> Regards
> Fabrice
>
>
> Le 2015-03-14 05:23, Minh Trung a écrit :
>
> Hello experts,
>
> I am newbie.
>
> My network as attached file and i suggested i should use PF as Vlan
> enforcement.
>
> My infrastructure already has:
>
> Vlan122: Servers (including PF server, pf is vmware)
> Vlan123: Office Users (PCs, Desktops, IP Phone, Printer)
> Vlan124: Telephone
> Vlan:125 Firewall
> Vlan126: Access Door
> .........
>
> I already own DNS, DHCP by Windows server
> Vlan123 will be DHCP via Windows Server 2008
> Now i want PF only apply for Vlan123, how to do that and which method i
> should use to authenticate for all Users, IP phone, Printer (This Vlan used
> wired)?
> I also plan used wifi in case visitor come to work, which authenticate
> method should i used in this case?
>
> On PF server already created 2 Vlan Registration and Isolation.
>
> These are config file that PF generated:
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *#pf.conf:[interface eth0]ip=10.126.122.27 --> my IP address's PF server
> type=managementmask=255.255.255.0[interface
> eth0.210]enforcement=vlanip=10.126.210.1type=internalmask=255.255.255.0[interface
> eth0.220]enforcement=vlanip=10.126.220.1type=internalmask=255.255.255.0*
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *And
> network.conf:[10.126.210.0]dns=10.126.210.1dhcp_start=10.126.210.10gateway=10.126.210.1domain-name=vlan-registration.globalnat_enabled=disablednamed=enableddhcp_max_lease_time=30fake_mac_enabled=disableddhcpd=enableddhcp_end=10.126.210.246type=vlan-registrationnetmask=255.255.255.0dhcp_default_lease_time=30[10.126.220.0]dns=10.126.220.1dhcp_start=10.126.220.10gateway=10.126.220.1domain-name=vlan-isolation.globalnat_enabled=disablednamed=enableddhcp_max_lease_time=30fake_mac_enabled=disableddhcpd=enableddhcp_end=10.126.220.246type=vlan-isolationnetmask=255.255.255.0dhcp_default_lease_time=30*
>
> What are the next step i should to do to apply PF for Vlan123 while many
> devices in this vlan.
> How to configuration of my Cisco switches look like?
> I have still many confused here.
> Hope someone can make me clearly.
> Any help is very very appreciated,
>
> Best regards,
>
>
>
>
> ------------------------------------------------------------------------------
> Dive into the World of Parallel Programming The Go Parallel Website, sponsored
> by Intel and developed in partnership with Slashdot Media, is your hub for all
> things parallel software development, from weekly thought leadership blogs to
> news, videos, case studies, tutorials and more. Take a look and join the
> conversation now. http://goparallel.sourceforge.net/
>
>
>
> _______________________________________________
> PacketFence-users mailing
> [email protected]https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
>
>
> ------------------------------------------------------------------------------
> Dive into the World of Parallel Programming The Go Parallel Website,
> sponsored
> by Intel and developed in partnership with Slashdot Media, is your hub for
> all
> things parallel software development, from weekly thought leadership blogs
> to
> news, videos, case studies, tutorials and more. Take a look and join the
> conversation now. http://goparallel.sourceforge.net/
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
