Hi, I finally got the mail stuff straighten out thanks for your help. However, I keep noticing every time I reboot everything stops working. All services are starting, but the management port gateway turns to 0.0.0.0 dns goes missing and nothing can reach the internet. I pulled my resolv file and same that the name server had been cleared out. Is there something I am doing wrong or missing? Prior to the reboot everything was working fine.
Kevin Lewis, -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, June 10, 2015 9:51 AM To: [email protected] Subject: PacketFence-users Digest, Vol 86, Issue 54 Send PacketFence-users mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit https://lists.sourceforge.net/lists/listinfo/packetfence-users or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of PacketFence-users digest..." Today's Topics: 1. Re: 802.1x authentication (Sohaib Afourid) 2. Self-reg page as default in captive portal (Gary Ossewaarde) 3. Re: Packetfence SMS & Email Registration (Gary Ossewaarde) 4. guests_self_registration.access_duration (Gary Ossewaarde) 5. Re: 802.1x authentication (Louis Munro) ---------------------------------------------------------------------- Message: 1 Date: Wed, 10 Jun 2015 10:56:21 +0200 From: Sohaib Afourid <[email protected]> Subject: Re: [PacketFence-users] 802.1x authentication To: [email protected] Message-ID: <caclwbgkm7qcnjjlmjh02x72a6zknov-2qksvuazxqvkbd11...@mail.gmail.com> Content-Type: text/plain; charset="utf-8" I guess it depends on the type of the violation, because when I applied a bandwidth violation it got redirected to the registration vlan, but when i applied a Rogue DHCP violation it got redirected to the isolation vlan. is it possible to change that ? I mean which vlan should the client be redirected to for each type of violation, if yes where can i change that ? Regards. 2015-06-10 10:12 GMT+02:00 Sohaib Afourid <[email protected]>: > I also i have a new issue, when i register a device manually, I plug > my client out and in back again, i authenticate and get redirected to > the Normal vlan, but when i apply a violation, i get redirected to the > registration vlan and not the isolation one. > -------------- next part -------------- An HTML attachment was scrubbed... ------------------------------ Message: 2 Date: Wed, 10 Jun 2015 11:54:43 +0000 From: Gary Ossewaarde <[email protected]> Subject: [PacketFence-users] Self-reg page as default in captive portal To: "[email protected]" <[email protected]> Message-ID: <cy1pr0601mb103661879a9f06daf68d657ee4...@cy1pr0601mb1036.namprd06.prod.outlook.com> Content-Type: text/plain; charset="iso-8859-1" Is there a way to make the self-registration page the default when users access the portal? The captive portal I want to do this on is used only for the guest wireless network. Additonally, is there a way to make self-reg more "wizardy" e.g., first page: Select how you would like to register: [button] Text Message [button] Email [button] Sponsor When you would click each button, you would go to another page that would have you accept the AUP and enter the required info for that type of registration. Thanks, Gary ------------------------------ Message: 3 Date: Wed, 10 Jun 2015 11:51:37 +0000 From: Gary Ossewaarde <[email protected]> Subject: Re: [PacketFence-users] Packetfence SMS & Email Registration To: "[email protected]" <[email protected]> Message-ID: <cy1pr0601mb1036314f1b3b24880707e44de4...@cy1pr0601mb1036.namprd06.prod.outlook.com> Content-Type: text/plain; charset="iso-8859-1" I am using PacketFence with Aerohive, although not inline. I've found this guide extremely helpful - https://community.aerohive.com/aerohive/topics/aerohive-integration-with-packetfence As for the SMS PIN, make sure you have a mailserver set up correctly and if the packetfence box is going to be your MTA, that an MTA is installed and configured properly. Gary ________________________________________ From: Lewis Jr, Kevin <[email protected]> Sent: Tuesday, June 9, 2015 10:22 AM To: [email protected] Subject: [PacketFence-users] Packetfence SMS & Email Registration Fabrice, I finally have packet fence partially running. I rebuilt the box and changed the setup to be inline enforcement. I have two Aerohives and I couldn't find in the manual how to configure them for inline enforcement. Another issue I am facing is with the SMS pin verification. I am not receiving any messages from packet fence with a pin number and email is registration is doing the same too. I have verified that packet fence is able to access the internet and I've also verified that the inline vlan is able to access the internet. Kevin Lewis, This electronic mail message is intended exclusively for the individual or entity to which it is addressed. This message, together with any attachment, may contain confidential and privileged information. Any unauthorized review, use, print, retention, copy disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email message and delete all copies of this message. Thank you. ------------------------------------------------------------------------------ _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users ------------------------------ Message: 4 Date: Wed, 10 Jun 2015 12:00:40 +0000 From: Gary Ossewaarde <[email protected]> Subject: [PacketFence-users] guests_self_registration.access_duration To: "[email protected]" <[email protected]> Message-ID: <cy1pr0601mb10365763f5867e0a545f2692e4...@cy1pr0601mb1036.namprd06.prod.outlook.com> Content-Type: text/plain; charset="iso-8859-1" I'm installing a new packetfence install to replace my PacketFence 3.5.1 install. In 3.5.1, I was able to set guests_self_registration.access_duration in Configuration > Guests_self_registration. I'm having trouble finding that in 5.1.0. Can anyone point me in the right direction? Thanks, Gary ------------------------------ Message: 5 Date: Wed, 10 Jun 2015 09:50:44 -0400 From: Louis Munro <[email protected]> Subject: Re: [PacketFence-users] 802.1x authentication To: [email protected] Message-ID: <[email protected]> Content-Type: text/plain; charset="us-ascii" One thing at a time. Get the normal workflow to work before you try to get fancy. -- Louis Munro [email protected] :: www.inverse.ca +1.514.447.4918 x125 :: +1 (866) 353-6153 x125 Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence (www.packetfence.org) On Jun 10, 2015, at 4:12 , Sohaib Afourid <[email protected]> wrote: > I also i have a new issue, when i register a device manually, I plug my > client out and in back again, i authenticate and get redirected to the Normal > vlan, but when i apply a violation, i get redirected to the registration vlan > and not the isolation one. > ---------------------------------------------------------------------- > -------- _______________________________________________ > PacketFence-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/packetfence-users -------------- next part -------------- An HTML attachment was scrubbed... ------------------------------ ------------------------------------------------------------------------------ ------------------------------ _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users End of PacketFence-users Digest, Vol 86, Issue 54 ************************************************* ------------------------------------------------------------------------------ _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
