Hello everyone!
We're deploying packefence in our university, we've choosed the OUT-OF-BAND
mode, as a basic configuration I've made a test on my Cisco catalyst 2960
switch and PF on my VMware!
Overview:
----------------------------------------------------------------------------------------------
Vlan 1: (where all port are assigned) is the MGT => 192.168.0.254
Vlan 2: Reg => 192.168.2.254
Vlan 3: Isolation => 192.168.3.254
Vlan 10: Normal => 192.168.10.254
My PF server (192.168.0.1) is connected to the switch on the port fa0/1 in
vlan 1 (mode access trunk)
---------------------------------------------------------------
But I have more than one problem! and it's killing me, cuz I was searching
in this mailing for 10 days without resolving em! I'd be very thankful if
you give me a hand since I don't have a big experience with NAC solutions
1) - I've configured the switch as mentioned in the documentation and
configured PF as well, but STILL when I'm plugging a laptop on the port
where I configured the MAB and 802.1X, I get in my switch :
-Starting mab for client xxxx
-Radius-server-dead: radius-server is not responding
-Radius-server-Alive: radius server is being marked alive
-MAB-5-FAIL: authentication failed for client xxxx
-Authentication result 'server dead' from 'mab' for client xxxx
And that's it nothing happens and the client don't recieve an IP address!
2)- when starting the service i get the following error:
-httpd: apr_sockaddr_info_get() failed
-httpd: Could not reliably determine the server's fully qualified domain
name, using 127.0.0.1 for ServerName
And Thank you very much in advance
Best regards!
------------------------------------------------------------------------------
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
