Hello All,
I am new to PF and am testing it in an isolated network for evaluation
purposes and figure out how it works. I am using version 5.1.0. I have been
able to get it up and running using RADIUS and 802.1x using AD auth and then AD
for registration/VLAN assignment which I then set for AutoRegistration on a
single switch. I am now expanding out to a second switch with a routed
network. Where I am at the network covers a large area, with each site having
its own VLAN and subnet and routed to the rest of the network (no network
spanned VLANs). I want to assign the user (well Role) to the correct VLAN
after registration based on the switch's IP address, how can I do this when the
standard GUI options do not have this as an option (under User -> Sources->
myADSource) under the conditions?
I can't realistically use the AD attributes available as none of them that
pinpoint location are used or used correctly (AD is a mess here) and so thus
the easiest way to assign the location's "Normal VLAN" is based on the network
from which the user is coming from. Thank you for any assistance.
Respectfully,
Rob
[email protected]<mailto:[email protected]>
------------------------------------------------------------------------------
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
