Hello Greg,
did you configure the WLC (Configuration -> Switch) in packetfence ?
What about "raddebug -d /usr/local/pf/raddb -t 3000" when you try to
connect on the ssid ?
Regards
Fabrice
Le 2015-07-04 13:35, Greg M a écrit :
Hi,
I am trying to get Packetfence setup with a Cisco WLC 2106 controller
and a number of various AP’s.
The AP’s and WLC themselves are fine, and I can successfully connect
to the unsecured Guest SSID, enter my username and password and sign in.
From there, however I get either the ‘unable to detect network
connectivity’ or ‘your network should be enabled within a minute or
two’ – and PF doesn’t move me from my guest SSID to my secure,
Internet-access SSID.
In the packetfence logs I see:
Jul 05 00:59:51 httpd.portal(2764) INFO: Authentication successful for
greg in source local (SQL) (pf::authentication::authenticate)
Jul 05 00:59:51 httpd.portal(2764) ERROR: attempt to add existing
person greg (pf::person::person_add)
Jul 05 00:59:51 httpd.portal(2764) INFO: Just finished seting the node
up
(captiveportal::PacketFence::Controller::Authenticate::postAuthentication)
Jul 05 00:59:51 httpd.portal(2764) INFO: Passed by the provisioning
(captiveportal::PacketFence::Controller::Authenticate::postAuthentication)
Jul 05 00:59:51 httpd.portal(2764) INFO: [00:24:d6:02:71:e2]
re-evaluating access (manage_register called)
(pf::enforcement::reevaluate_access)
Jul 05 00:59:51 httpd.portal(2764) WARN: [00:24:d6:02:71:e2] Can't
re-evaluate access because no open locationlog entry was found
(pf::enforcement::reevaluate_access)
Jul 05 00:59:51 httpd.portal(3433) INFO: Matched IP '10.10.21.11' to
MAC address '00:24:d6:02:71:e2' using SQL 'iplog' table
(pf::iplog::ip2mac)
On the WLC I am seeing :
17 Sun Jul 5 00:36:11 2015 RADIUS server 10.10.17.250:1812
failed to respond to request (ID 10) for client 00:24:d6:02:71:e2 /
user 'unknown'
And further testing:
root@pf:/usr/local/pf/logs# radtest execution query 10.10.17.250 12
testing123
Sending Access-Request of id 20 to 10.10.17.250 port 1812
User-Name = "execution"
User-Password = "query"
NAS-IP-Address = 10.10.17.250
NAS-Port = 12
Message-Authenticator = 0x00000000000000000000000000000000
Sending Access-Request of id 20 to 10.10.17.250 port 1812
User-Name = "execution"
User-Password = "query"
NAS-IP-Address = 10.10.17.250
NAS-Port = 12
Message-Authenticator = 0x00000000000000000000000000000000
Sending Access-Request of id 20 to 10.10.17.250 port 1812
User-Name = "execution"
User-Password = "query"
NAS-IP-Address = 10.10.17.250
NAS-Port = 12
Message-Authenticator = 0x00000000000000000000000000000000
radclient: no response from server for ID 20 socket 3
So is the issue with the PF Radius install? Is there something simple
that needs to be done to fix this ?
Many thanks,
Greg
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
