Hi all,
I have installed packetfence server in a VM of zen host. I have installed
packetfence version 5.2 and ip address use for the server is 10.1.2.28.
the content of pf.conf is as follows:-
[interface eth0.10]
enforcement=inlinel2
ip=192.168.10.1
type=internal
mask=255.255.255.0
[interface eth0.11]
ip=10.1.2.28
type=management,high-availability
mask=255.255.255.240
[interface eth0.132]
enforcement=vlan
ip=192.168.132.1
type=internal
mask=255.255.255.0
[interface eth0.12]
ip=192.168.12.1
type=portal
mask=255.255.255.0
[interface eth0.13]
enforcement=vlan
ip=192.168.13.1
type=internal
mask=255.255.255.0
and the content of switch.conf is
[10.1.32.245]
RoleMap=N
mode=registration
VlanMap=N
AccessListMap=N
description=Juniper Ex 2200
type=Juniper::EX2200
VoIPEnabled=N
uplink_dynamic=0
uplink=1
inlineTrigger=always::1
and i have a juniper ex 2200 switch. i have configure juniper to start
getting a copy of all the DHCP traffic and start populating its database. So
i use below command
The IP address of switch is 10.1.32.245 and I can ping and ssh to switch
from pf server.
forwarding-options {
helpers {
bootp {
server 10.1.2.28;
Now i can see some Mac addresses in juniper switch port ge-0/0/2 but it not
being forwarde to the Nodes of packetfence.
#run show ethernet-switching table
Ethernet-switching table: 27 entries, 26 learned, 0 persistent entries
VLAN MAC address Type Age Interfaces
default * Flood - All-members
default 00:03:0f:10:3e:a3 Learn 0 ge-0/0/2.0
default 00:03:0f:12:18:1a Learn 33 ge-0/0/2.0
default 00:0c:29:fc:c5:b9 Learn 0 ge-0/0/2.0
default 00:0e:5e:14:f2:7a Learn 0 ge-0/0/2.0
default 00:0e:5e:15:13:2a Learn 0 ge-0/0/2.0
default 00:15:65:46:83:f3 Learn 51 ge-0/0/4.0
default 00:1a:64:94:06:a8 Learn 4:44 ge-0/0/2.0
default 00:e0:2b:00:00:01 Learn 1:06 ge-0/0/2.0
default 00:e0:4c:41:05:77 Learn 1:03 ge-0/0/2.0
default 00:e0:4c:50:ae:9a Learn 0 ge-0/0/2.0
default 00:e0:4c:80:a3:57 Learn 0 ge-0/0/2.0
default 08:86:3b:8d:e8:b3 Learn 51 ge-0/0/2.0
default 10:78:d2:81:8e:51 Learn 54 ge-0/0/2.0
default 14:f6:5a:ee:7f:fa Learn 0 ge-0/0/2.0
default 3c:61:04:6a:e7:c1 Learn 0 ge-0/0/2.0
default 3c:61:04:fa:9f:c1 Learn 0 ge-0/0/2.0
default 9c:4e:20:2e:92:8d Learn 0 ge-0/0/2.0
default 9c:4e:20:2e:92:98 Learn 0 ge-0/0/2.0
default 9c:ad:97:6b:27:b5 Learn 0 ge-0/0/2.0
default b0:00:b4:0e:ee:80 Learn 0 ge-0/0/2.0
default bc:5f:f4:bf:95:95 Learn 1:27 ge-0/0/2.0
default bc:67:1c:c8:26:ac Learn 1:35 ge-0/0/2.0
default bc:67:1c:c8:26:ae Learn 41 ge-0/0/2.0
default cc:e1:7f:8c:06:18 Learn 0 ge-0/0/2.0
default cc:e1:7f:8c:b1:ff Learn 0 ge-0/0/22.0
default dc:85:de:32:e1:9d Learn 0 ge-0/0/2.0
I am not able to communicate between switch and the packetfence server.
Can anybody help me?
Thank you,
------
Regards,
Kishore Thapa
System Administrator,
The Village,
United Distribution Nepal Pvt.Ltd.,
Trade Tower Thapathali
*********************************
------------------------------------------------------------------------------
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
