Hi all, I'm running a Ruckus ZoneDirector WLC behind a router on an internal, NAT'd IP address in our office. Our PacketFence server is on a totally separate network in our data centre.
We are using WebAuth and authorization works perfectly but there is a problem with deauthorizing users. Looking at the RADIUS messages, during the accept operation the Ruckus ZD sends the internal IP address in the NAS-IP-Address field rather than the external IP address. When PF later tries to deauthorize a user, it sends the message to the internal IP address so the Ruckus ZD does not receive it. I've already talked with Ruckus but there is no way to configure the NAS-IP-Address. Is there any way to change the IP address that FreeRadius uses to send the CoA message? Thanks, Michael Invigor Group Limited is a company registered in Australia (ABN 75 081 368 274). This email and any attachments are intended solely for the use of the addressee(s) and may contain information that is confidential, subject to copyright and subject to legal professional privilege. If you have received this email in error, please notify the sender immediately, delete it and destroy all copies. Any views expressed are those of the individual sender unless expressly stated otherwise. In respect of this email and any attachments, to the extent permitted by law, no warranty is given and all liability is excluded,including, without limitation, liability for any loss or damage caused by way of computer virus, defect, delay, or interruption. ------------------------------------------------------------------------------ _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
