Hello, Thank you again for your help.
> I?m assuming your AP IP address is 192.168.10.2 ? (Just want to make > sure ;)) Yes it is. > 2. Check what value is defined from NAS-IP-Address in the > accept-request message which should occur as soon as you connect a > client to the AP. The value defined in the NAS-IP-Adress is 192.168.10.2 (the IP of my access point). > 3. Run TCPDUMP on your PacketFence server to trace the RADIUS CoA > message > tcpdump -i eth0 udp port 3799 -w /tmp/radius.pcap Here I can see the disconnect message with the destination of my AP. And the attribute is: AVP: l=19 t=Calling-Station-ID(31): B8-4F-D5-E3-51-D8 This MAC-Adress is th one of the device I'm trying to connect. Regards, Ellyn ------------------------------------------------------------------------------ _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
