Dear Derek, Any thought on my issue..... Regards, --Chinmay
From: "Chinmay Mahata" <[email protected]> Sent: Fri, 09 Oct 2015 18:13:36 To: "[email protected]" <[email protected]> Subject: Re: [PacketFence-users] pfdhcplistener Dear Derek, Thanks for your quick response. I think I could not describe my problem/query properly. DHCPD is running on only one interface (eth0) of my PF server, no issue with that. Actually at the WAN side (upstream) of my PF server there is another DHCP server is running (though PF server WAN has static IP). Since pfdhcplistener is running at eth1(WAN) also, in the node (web)page I can see many unregistered nodes of WAN network which I don't want. I want to see only those nodes in the webpage which are under PF server and who are getting IP addresses from DHCP server running in PF server (on eth0). Hope pfdhcplistener on eth0 only can catch those. So I want to run only one instance of pfdhcplistener on interface eth0 (pfdhcplistener_eth0). Please let me know how can I do that. Thanks again Derek. Regards, --Chinmay From: Derek Wuelfrath <[email protected]> Sent: Thu, 08 Oct 2015 22:11:09 To: ML PF <[email protected]> Subject: Re: [PacketFence-users] pfdhcplistener Chinmay,The packetfence server is working as a DHCP server.I see that two pfdhcplisteners are running: pfdhcplistener_eth0, pfdhcplistener_eth1.But I want to run only one pfdhcplistener viz. pfdhcplistener_eth0. Can it be possible (or it may cause other problem)? Which config item do I need to modify for that?‘pfdhcplistener’, as its name says, listen for dhcp packets.PacketFence starts a ‘pfdhcplistener’ daemon on each of the required network interfaces (in this case, management and inline).‘pfdhcplistener’ is not acting as a DHCP server, dhcpd is. ‘pfdhcplistener’ is only listening to DHCP packet for MAC <-> IP association useful in PacketFence.If you do a ps uafx | grep dhcpdyou should see the dhcpd daemon running with only eth0 as listening interface. Cheers!dw.—Derek [email protected] :: +1.514.447.4918 (x110) :: +1.866.353.6153 (x110)Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence (www.packetfence.org) On Oct 8, 2015, at 10:42 AM, Chinmay Mahata <[email protected]> wrote:Hi, I have setup packetfence(5.4.0) with inline enforcement having below interface details (LAN: eth0, WAN: eth1).[interface eth0]enforcement=inlinel2type=internal[interface eth1]type=managementThe packetfence server is working as a DHCP server.I see that two pfdhcplisteners are running: pfdhcplistener_eth0, pfdhcplistener_eth1.But I want to run only one pfdhcplistener viz. pfdhcplistener_eth0. Can it be possible (or it may cause other problem)? Which config item do I need to modify for that?Waiting for your help.Thanks in advance.--Chinmay ------------------------------------------------------------------------------ _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
