Hello Fabrice,
Yes, normally IP dhcp pool vlan188 will send the DHCP Option "132" to phone
and switch to vlan122.
But with violation rule, the phone will only stick to vlan188 and autoreg,
the dhcp option is not functioning.
After struggling a little bit more.. now is working perfectly :-)
Finally.
Fix (switches.conf)
VoIPEnabled=Y
Thank you very much!
Regards,
Reeyon
On Tue, Feb 2, 2016 at 10:45 PM, Fabrice DURAND <[email protected]> wrote:
> Hello Reeyon,
>
> if the phone is in the vlan 188 then it suppose to receive the dhcp
> option and start to talk on the vlan 122, isn't it ?
>
> Regards
> Fabrice
>
> Le 2016-02-01 00:28, Reeyon Lim a écrit :
> > Hello Everyone,
> >
> > In order to automatically register our Yealink phone in our
> > environment, we had tested working using vlan_filter.conf method by
> > filtering its MAC vendor.
> > Is there any other better way like "Violation" function to detect and
> > put them into the autoreg list, and will not causing any issue for the
> > multi-domain VLAN.
> >
> > The phone in our environment isn't using LLDP or CDP method to do the
> > auto-provisioning, but we are using DHCP Option VLAN to do so.
> > For example:
> > default vlan 188 (for pc Internet)
> > voice vlan 122 (for voice)
> >
> > ip dhcp pool vlan188
> > dhcp option 132 ascii "122"
> >
> > *int gi0/48*
> > switchport access vlan 188
> > switchport mode access
> > switchport voice vlan 122
> > authentication host-mode multi-domain
> > authentication order dot1x mab
> > authentication priority dot1x mab
> > authentication port-control auto
> > authentication periodic
> > authentication timer restart 10800
> > authentication timer reauthenticate 10800
> > mab
> > no snmp trap link-status
> > dot1x pae authenticator
> > dot1x timeout quiet-period 2
> > dot1x timeout tx-period 3
> > spanning-tree portfast
> >
> > We had tried to make one Violation rule, auto detect Yealink devices,
> > and put them autoreg list.
> > Although it was working as we thought, such as registered Yealink
> > device, placed them into phones role with the specified VLAN.
> >
> > Below is our config in violations.conf
> > [3500000]
> > priority=1
> > trigger=device::76
> > actions=autoreg,role
> > desc=phones
> > template=system_scan
> > auto_enable=N
> > vlan=default
> > target_category=voice
> > enabled=Y
> >
> >
> > The problem we are encountered here is:
> > 1. DHCP VLAN doesn't work (maybe "violation" rule replace and taking
> > precedence)
> > 2. pf forced switchport to vlan188.
> >
> >
> > Regards,
> > Reeyon
> >
> >
> >
> >
> >
> ------------------------------------------------------------------------------
> > Site24x7 APM Insight: Get Deep Visibility into Application Performance
> > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> > Monitor end-to-end web transactions and take corrective actions now
> > Troubleshoot faster and improve end-user experience. Signup Now!
> > http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
> >
> >
> > _______________________________________________
> > PacketFence-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
> --
> Fabrice Durand
> [email protected] :: +1.514.447.4918 (x135) :: www.inverse.ca
> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence (
> http://packetfence.org)
>
>
>
> ------------------------------------------------------------------------------
> Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
