Hello,
I currently have a SOHO setup, Peplink Balance 105 router connected to a web managed Netgear switch (not supported by packetfence, but allows me to configure VLAN's). I recently bought a few Pepwave AP One access points and would like to secure only the wireless network using packetfence. I am testing with ZEN and have followed the Out-of-Band Deployment Quick Guide all the way up to section 6.1. The beginning of section 6.3 shows how to configure packetfence for a Cisco switch. Would I need to do something similar with packet fence to make it work with the Pepwave AP access points? If yes, can someone point me in the right direction please? I have also read section 5.2. about Unsupported Equipment and the Pepwave AP's support mac authentication along with 802.1x. The access points are also really easy to configure, my main issue is with the configuration of packetfence. Is it possible to secure wireless only without using a supported switch (as in my case, using a simple netgear switch that has VLAN functionality)? Also, what does the following clause mean: "On your production VLANs a copy of the DHCP traffic must reach PacketFence"? If all of my wireless clients are on VLAN 21, does that mean I'd need to forward DHCP traffic from VLAN 21 to the management VLAN (where packetfence resides)? Thank you, Eddie
------------------------------------------------------------------------------
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
