Hello Morgan,
Allowed traffic over ports 9393 and 9191 by uncommenting the appropriate
lines in the iptables.conf (I note that in the guide it says 9393 and
9292 so not sure if that is a typo on the iptables or the guide)
That should be 9393 and 9191, will be corrected.
The PacketFence PKI should still be supported and working.
It seems you have issue with django dependencies could you do "rpm -qa |
grep django".
I will try to setup one PKI quick and let you know.
Thanks
On 11/25/2016 11:45 AM, Morgan, Darren wrote:
Hi,
I’m still having major issues getting the PKI to install using the
instructions provided (PacketFence_PKI_Quick_Install_Guide.pdf ) I’m
using a fresh install of PacketFence 6.4.0 ZEN running on VMWare
VSphere 6 Hypervisor (Given it 24GB RAM, 4 virtual sockets, with 2
cores each, and 200GB drive)
I’ve set up the system to link with our AD and is registered in our
Domain. Checked with a laptop plugged in to an HP Procurve
2520G-8-PoE switch and end users can connect fine. Even have Firewall
SSO setup with iBoss which works buaetifully)
The problem I have is when I go through the PKI install guide;
_Prepare to install with PacketFence_
Allowed traffic over ports 9393 and 9191 by uncommenting the
appropriate lines in the iptables.conf (I note that in the guide it
says 9393 and 9292 so not sure if that is a typo on the iptables or
the guide)
Restarted the iptables service
_CentOS/RHEL_
(Assuming I use the CentOS instructions as I’m using ZEN)
Tried the commands for this step and get the following errors;
[root@localhost ~]# yum localinstall
http://inverse.ca/downloads/PacketFence/CentOS6/x86_64/RPMS/packetfence-release-1-2.centos6.noarch.rpm
Loaded plugins: fastestmirror
Setting up Local Package Process
packetfence-release-1-2.centos6.noarch.rpm | 2.8 kB 00:00
Examining
/var/tmp/yum-root-PnLIg2/packetfence-release-1-2.centos6.noarch.rpm:
packetfence-release-1-2.centos6.noarch
/var/tmp/yum-root-PnLIg2/packetfence-release-1-2.centos6.noarch.rpm:
does not update installed package.
Nothing to do
[root@localhost ~]# yum install packetfence-pki
--enablerepo=packetfence-extra, packetfence
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
* base: mirror.cov.ukservers.com
* extras: mirrors.ukfast.co.uk
* updates: mirror.cov.ukservers.com
base | 3.7 kB 00:00
base/primary_db | 4.7 MB 00:01
extras | 3.4 kB 00:00
extras/primary_db
|
37 kB 00:00
mariadb
|
2.9 kB 00:00
mariadb/primary_db
|
22 kB 00:00
packetfence-extra
|
951 B 00:00
packetfence-extra/primary
|
74 kB 00:00
packetfence-extra
255/255
updates | 3.4
kB 00:00
updates/primary_db | 3.7 MB 00:01
Resolving Dependencies
--> Running transaction check
---> Package packetfence-pki.noarch 0:1.0.4-1.el6 will be installed
--> Processing Dependency: python-pyasn1-modules >= 0.1.7 for package:
packetfence-pki-1.0.4-1.el6.noarch
--> Processing Dependency: python-django-bootstrap3 for package:
packetfence-pki-1.0.4-1.el6.noarch
--> Processing Dependency: python-django-rest-framework for package:
packetfence-pki-1.0.4-1.el6.noarch
--> Processing Dependency: python-ldap for package:
packetfence-pki-1.0.4-1.el6.noarch
--> Processing Dependency: django-countries for package:
packetfence-pki-1.0.4-1.el6.noarch
--> Running transaction check
---> Package packetfence-pki.noarch 0:1.0.4-1.el6 will be installed
--> Processing Dependency: python-pyasn1-modules >= 0.1.7 for package:
packetfence-pki-1.0.4-1.el6.noarch
--> Processing Dependency: python-django-bootstrap3 for package:
packetfence-pki-1.0.4-1.el6.noarch
--> Processing Dependency: python-django-rest-framework for package:
packetfence-pki-1.0.4-1.el6.noarch
--> Processing Dependency: django-countries for package:
packetfence-pki-1.0.4-1.el6.noarch
---> Package python-ldap.x86_64 0:2.3.10-1.el6 will be installed
--> Finished Dependency Resolution
Error: Package: packetfence-pki-1.0.4-1.el6.noarch (packetfence-extra)
Requires: django-countries
Error: Package: packetfence-pki-1.0.4-1.el6.noarch (packetfence-extra)
Requires: python-django-rest-framework
Error: Package: packetfence-pki-1.0.4-1.el6.noarch (packetfence-extra)
Requires: python-pyasn1-modules >= 0.1.7
Error: Package: packetfence-pki-1.0.4-1.el6.noarch (packetfence-extra)
Requires: python-django-bootstrap3
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
[root@localhost ~]#
Is there a problem with using the PacketFence-PKI? Is it not
supported anymore? I really need to get this going in the next 2
weeks as I’m looking to get this connected to our Meru Wi-Fi and
sorting out guest access before Christmas.
Thanks for any advice.
Regards
Darren Morgan
Systems Manager
Oundle School
*ü***Please consider the environment before printing this e-mail
This email is sent from either Oundle School or Laxton Junior School
for The Corporation of Oundle School and is intended only for the
addressee named above. The Corporation of Oundle School is a Charity
incorporated under Royal Charter RC000396 and charity number 309921.
www.oundleschool.org.uk <http://www.oundleschool.org.uk>
------------------------------------------------------------------------
Scanned by iCritical.
------------------------------------------------------------------------------
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
--
Antoine Amacher
[email protected] :: www.inverse.ca
+1.514.447.4918 x130 :: +1 (866) 353-6153 x130
Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence
(www.packetfence.org)
------------------------------------------------------------------------------
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
