Hi all,
I'm delivering my new PF to test wired 802.1x on my network. I need to work
with routed network because PF is in our datacenter and I need to control
subnets on remote sites. So I've created a local registration/isolation vlan
directly attached to the server and I configured new vlans on the sites. I then
configured PF to know that he is working in routed mode adding the necessary on
conf/networks.conf as said in the admin giude. What I don't understand is if I
need to add remote networks on the routing table of the server because at the
moment the registration/isolation interfaces are not reachable and if I take a
look to the routing table:
[root@pfnac01 ~]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.17.231 0.0.0.0 UG 0 0 0 ens160
10.255.10.0 0.0.0.0 255.255.255.0 U 0 0 0
ens192.2441
10.255.20.0 0.0.0.0 255.255.255.0 U 0 0 0
ens192.2445
10.255.30.0 0.0.0.0 255.255.255.0 U 0 0 0
ens192.2446
169.254.0.0 0.0.0.0 255.255.255.252 U 0 0 0 DM-b
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 ens160
169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 ens192
169.254.0.0 0.0.0.0 255.255.0.0 U 1004 0 0
ens192.2441
169.254.0.0 0.0.0.0 255.255.0.0 U 1005 0 0
ens192.2445
169.254.0.0 0.0.0.0 255.255.0.0 U 1006 0 0
ens192.2446
172.27.17.0 0.0.0.0 255.255.255.0 U 0 0 0 ens160
Where 10.255.10.0 is my regular network, 10.255.20.0 is my local registration,
10.255.30.0 is my local isolation and 172.27.17.0 is the management. I can't
see my remote networks 10.149.105.0 (remote registration) and 10.148.105.0
(remote isolation).
Any help is appreciated
Thanks
Luca
Inviato da Outlook<http://aka.ms/weboutlook>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users