Hello Rokkhan,
i need to check in the code why you have this error when the certificate
already exist.
Also the port for ocsp is 9292.
Last thing, to have online/offline status you need to have the radius
accounting enable.
Regards
Fabrice
Le 2017-06-19 à 14:30, Rokkhan via PacketFence-users a écrit :
Hi,
I am trying to configure a wireless network using pakcetfence-pki and
user certificates.
I have configured a role limited to 3 devices per user and configured
packetfence-pki to generate user certifcates using ldap's user id
instead of device mac adress.
The issue is that when the user generates the certificate for the
first device I get an error generating certificate that I think is
related to that an user certifcate previously exists, because if i
remove the previously generated certificate i do not get any error.
what am i doing wrong? How can i apply the 3 device limit per user
using eap-tls?
When I connect to SSID using the generated certificate user is marked
as login ok through radius but I get ocsp error. What port do have to
configure in eap.conf module? 9191 9292 or 9393 ?
Once the users are logged in the eap-tls ssid through radius server
the packfence server does not show status of the device. I mean, if i
filter to "online nodes" this devices are not shown.
Greetings.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
