Hello Thomas,
yes it's possible to do that, just configure snat interface in network
config.
This will enable nating on the specific interface but you will need to
use the router ip as the default gateway on packetfence.
Also i prefer debian as centos (i do the debian packaging) and i did a
test for 7.2 with a debian jessie minimal install and didn't see any
issue to install packetfence.
Before you start to install on debian be sure that the server is able to
reach internet and to resolv any fqdn.
Btw give me all the step you did.
Regards
Fabrice
Le 2017-07-12 à 20:50, Thomas via PacketFence-users a écrit :
I tried it, but still seem to be having the same issue
I finally bit the bullet and went for CentOS, even though I’m a debian
guy.
I got the install to happen with 0 issues, went to go though the
configuration steps and this is where I am now getting confused.
I want to setup PF as a inline device between my router and my switch
Internet ---- Router ---- PF ---- Network
The way I understand the documentation is to set the connection
between the router and PF as the management network, and the PF to
Network connection as the Inline connection
However what id like to do, if possible, is add a third network to PF
for the management.
Internet --- Router --- PF --- Network
--- Management
So the 3 interfaces I would end up with is Public Internet, Private
Lan and Management
I hope this makes sense, and when I get some more free time, ill go
back to playing with debian and see if I can get the installer to work
on there as well
Thanks
*From: *jrouzier via PacketFence-users
<mailto:[email protected]>
*Sent: *Thursday, 13 July 2017 02:53
*To: *[email protected]
<mailto:[email protected]>
*Cc: *jrouzier <mailto:[email protected]>
*Subject: *Re: [PacketFence-users] Installing PacketFence Help?
Thomas,
It looks like there is a package missing
Try this and let me know.
apt-get install libclass-xsaccessor-perl
On 2017-07-11 6:01 PM, Thomas via PacketFence-users wrote:
Hey team
Im trying to install packetfence on a VM and I keep running into
issue after issue
I have tried to fix a few of them, but just keep hitting walls.
Can I get some help with installing it on my system.
I am installing it on a XenServer VM, happy to provide specs if
required
Here are the steps I have taken
First I installed Debian 8, updated everything and started the
install instructions from here
https://packetfence.org/doc/PacketFence_Administration_Guide.html
The first problem I kept running into was getting the key from
keys.gnupg.net (kept timing out)
I fixed this by pinging the server and using the IP that it
returned rather then the domain
(Although the domain worked fine this last time I did it while
writing these notes)
The next problem is when downloading what I assume is the
FingerBank Database
fingerbank_Upstream.db, always times out with the error
“curl: (18) transfer closed with 719998577 bytes remaining to read”
I have managed to fix it by going into
/var/lib/dpkg/info/fingerbank.postinst
and changing the curl command to the following
curl -o $FINGERBANK/db/fingerbank_Upstream.db
https://fingerbank.inverse.ca/api/v1/download?key=${_APIKEY}
<https://fingerbank.inverse.ca/api/v1/download?key=$%7b_APIKEY%7d>
--compressed
This allows it to shrink the file enough to download it.
(From aprox 1.5GB to 382MB)
This is where I am upto with Debian 8
first comes a long list of errors similar to this
insserv: warning: current start runlevel(s) (empty) of script
`freeradius' overrides LSB defaults (2 3 4 5).
insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of
script `freeradius' overrides LSB defaults (0 1 6).
Then
Could not write namespace config::
Could not write namespace interfaces
Quite a few lines of this
Followed by a few lines of
BEGIN failed--compilation aborted at
/usr/local/pf/lib/pf/dal/iterator.pm line 19.
Compilation failed in require at /usr/local/pf/lib/pf/dal.pm line 25.
And finally
Job for packetfence-httpd.admin.service failed.
Full PasteBin Here
https://pastebin.com/ygpJ43nk
I have tried Debian 7 as well, and gotten different errors
(Cant remember which off the top of my head, but I can redo it if
you need logs)
And the Virtual Appliance (OVF) file Imports fine into my VM
Then hangs on
A start job is running for dev-mapp...100.device
I have left it for half an hour which I know is excessive but
nothing changed
I know its a lot going on, and I feel like i’m missing an
important step causing all these errors during install.
Any help would be appreciated.
Thanks
Tom
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
