Hello Yan,
use proxy_passthroughs=123.23.1.2 instead of passthroughs=123.23.1.2 and
retry.
Regards
Fabrice
Le 2017-11-22 ?? 10:26, Yan via PacketFence-users a ??crit?0?2:
> In short, I want to know if it is possible to use PF's Captive Portal
> detection mechanism to pop out the captive portal, and no need to
> input any username and password, but with a url link inside the
> captive portal, and the user can then access the url with passthrough
> mechanism ?
>
> My pf.conf is as below:
> [fencing]
> passthrough=enabled
> #allow below host??s 80 port to reach the download link
> passthroughs=123.23.1.2
>
> [captive_portal]
> network_detection_ip=172.20.3.120
> secure_redirect=disabled
>
>
> ------------------ Original ------------------
> *From:* packetfence-users <packetfence-users@lists.sourceforge.net>
> *Date:* ????,11?? 22,2017 21:53
> *To:* packetfence-users <packetfence-users@lists.sourceforge.net>
> *Cc:* Yan <1136723...@qq.com>
> *Subject:* Re: [PacketFence-users] [WISPr redirection]Can't direct
> user todownload specific files in registration VLAN
>
> Hi dear users,
>
> We use PF V7.3 in our office. Currently we set the authentication
> process as below:
> 1. Connect to secure ssid PF-wireless with 802.1x username and password.
> 2.After connection, the user default be set to registration VLAN.
> 3.We create a root portal module with only message.html, within which
> we add a download link(http://123.23.1.2/agent-install.html) pointing
> to host 123.23.1.2.
> 4.After user passed 802.1x authentication, there is a pop up window
> redirecting user to our portal. And the user can see the link.
> 5.User click the link to download our agent file and then the host
> 123.23.1.2 will know and?0?2send a message log to PF, PF will register
> this user's device.
> 6.The user belongs to normal VLAN now and get the right network access.
>
> Now some mac OSX users can't open the link in the auto pop up window.
> Windows users don't have this problem. I checked this problem with my
> own computer and find if I don't close the auto pop up window, I can't
> even connect to PF registration IP. If I close the pop up window and
> open a new browser my network will be redirected to the portal page.
> And I can download the package from this new browser.
>
> I know that the auto pop up page is accomplished by PF's WISPr
> redirection capabilities, can you tell how it works ? Why can't I
> download file by the link in portal on mac osx ?
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
> _______________________________________________
> PacketFence-users mailing list
> PacketFence-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
--
Fabrice Durand
fdur...@inverse.ca :: +1.514.447.4918 (x135) :: www.inverse.ca
Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence
(http://packetfence.org)
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users
