Hello,
We are trying to evaluate PacketFence as our new NAC solution. Our current
solution uses MAB with our Ruckus Wireless Controller. According to the logs
and debugs, we have successfully gotten a device to be assigned to the
registration vlan. The change of vlan request message goes to the Ruckus
Controller and dies. Looking at tcpdump, no DHCP requests come into the
PacketFence DHCP server from the Ruckus Controller, AP or our Wireless Device.
Our router (Juniper) has a DHCP Helper address for the PacketFence Server and
set to forward anything from the registration vlan and vlan used by the
Controller. Does the Controller need to have any DHCP Relay enabled? This would
mean enabling tunneling as well. And what would the configuration of the switch
port (Dell 7048) that the Controller is plugged into need to be? Currently it
is set to Trunk with the native vlan being the vlan used by the wireless
devices.
Regards,
Peter Truax
Network Admin
St. Martin's University
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
