Hi all,
I've migrated my single node infrastructure to a 3 node cluster. At the moment
I'm testing 802.1x with a Cisco catalyst 2950 and the authentication is working
fine. I also have in production a wireless guest access with sponsor on Cisco
WLC taht is working really well. Unfortunately I noticed that the client IP
address is never updated on the nodes page. I have a production DHCP server on
the same management VLAN with udp_reflector pointing to the new VIP on the
cluster. With single node the problem wasn't showed and the IP was correctly
updated after a few seconds. The command I'm using on the DHCP server is:
/usr/local/bin/udp_reflector -s pcap2:67 -d 172.27.17.7:767 -b 25000 &
Where 172.27.17.7 is the VIP exposed by the cluster.
I would expect UDP port 767 on PF nodes in listening but they are not. Is
something missing in my configuration?
Thanks
Luca
Inviato da Outlook<http://aka.ms/weboutlook>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
