Hello Fabricio,
you are mixing two concepts, inline and hotspot, so you have to choose
one of them.
If you choose inline then just assign the inline vlan to the ssid
without any radius config.
If you choose hotspot then assign a production vlan to the ssid with
radius/hotspot config (cf network admin guide).
Regards
Fabrice
Le 2018-01-22 à 11:13, Fabricio Lorenzon via PacketFence-users a écrit :
Hello, I need help for the problem described below:
I am using packetfence in inline mode to authenticate users of the
wifi network through the captive portal integrated with Facebook and
Google in Oauth2 mode.
The packetfence server has a network interface with internet access
and one configured in inline mode for user access.
The access point (Ruckus) has a wlan in hotspot mode as described in
the "Network Devices Configuration Guide".
The moment the user connects in the WIFI network is directed is
directed to the inline interface of packetfence, accesses the captive
portal and can successfully authenticate using a google or facebook
account. The problem is that ruckus can not authorize this user's
access and the WIFI network remains with the message "No internet
access" and the device remains "unauthorized" in the ruckus
zonedirector web interface.
Thank's
Fabrício
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
