Hi dear user,
Recently we have a headache that some users always have network connection
issue after authenticated(I mentioned this issue in one other mail but not
found root cause). We've checked time by time but it seems all the process
works well. Today when I check the logs I found there is a default enabled
violation named "Bandwidth Limit". I never turn on this feature from the very
beginning. As per the violation description, it seems this violation will let
end user disconnected from network if his device exceeds the bandwidth limit.
Our issue phenomenon is that some ios smartphones can auth successfully and get
IP address and network access for a while. And then about 1 or 2 minutes later,
the device lost all network access. No more network access to any website or
apps. In the meantime, we can see there's some logs recorded that accounting
stop in AC. Will this caused by this violation ? What's this violation used for
? I closed it manually just now to see if better.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
