Guys,
How can I see if a specific VLAN ID that I assigned to the switch (or rather
WAP) in “Role by VLAN ID” setting.
I have it as follows (extract from switches.conf file)
StaffRole=10
StaffVlan=10
Should I take into account not a very good marriage of Ubiquiti Unifi and
FreeRADIUS when it comes to VLAN ID assignment?
I see in the RADIUS debugs that VLAN is indeed assigned to the user session
(see below) but what is its ID ?
(88) attr_filter.packetfence_post_auth: EXPAND %{User-Name}
(88) attr_filter.packetfence_post_auth: --> it.tech
(88) attr_filter.packetfence_post_auth: Matched entry DEFAULT at line 10
(88) [attr_filter.packetfence_post_auth] = updated
(88) linelog: EXPAND messages.%{%{reply:Packet-Type}:-default}
(88) linelog: --> messages.Access-Accept
(88) linelog: EXPAND [mac:%{Calling-Station-Id}] Accepted user:
%{reply:User-Name} and returned VLAN %{reply:Tunnel-Private-Group-ID}
(88) linelog: --> [mac:3c:2e:ff:3b:c7:ca] Accepted user: and returned VLAN
(88) [linelog] = ok
(88) } # post-auth = updated
(88) Login OK: [it.tech] (from client 172.19.254.2 port 0 cli 3c:2e:ff:3b:c7:ca)
(88) Sent Access-Accept Id 46 from 172.16.0.222:1812 to 172.19.254.2:32784
length 0
Eugene
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
