Hello Dang,
what kind of switch are you using because sometime vlan id started from
1000 are reserved ?
Also did you try to capture on a vlan interface on the pf side to see if
you have traffic ?
What return ifconfig ?
Regards
Fabrice
Le 2018-05-22 à 21:19, Dang Van Chuyen via PacketFence-users a écrit :
Hi,
I just set up PF on a Centos 7 server with these network configurations:
On my switch, I set trunk to PF server and have some access ports with
VLAN 1001; 1002; however, clients on these ports cannot get IP
address. Even when I set static IP, it cannot ping to PF interface either.
On the server, before installed PF; I already disabled firewalld and
selinux.
Where I can check the log to see the problem ?
Thanks,
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users
