Hi,
I am trying to use PF only as a Radius Server, but all requests are
rejected.
Thus, it seems to be working.
I have just realized that there is no interface showing up in the web
interface.
network.conf is EMPTY
I am using CENTOS 7
How do I stop all packetfence processes and start it again?
How to make PF to recognize interfaces?
-bash-4.2# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 206.81.10.58 netmask 255.255.240.0 broadcast 206.81.15.255
inet6 fe80::1874:21ff:fe53:eec1 prefixlen 64 scopeid 0x20<link>
ether 1a:74:21:53:ee:c1 txqueuelen 1000 (Ethernet)
RX packets 9329 bytes 1159788 (1.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8378 bytes 1623150 (1.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 14305923 bytes 2728806397 (2.5 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 14305923 bytes 2728806397 (2.5 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Annibal
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
