Hello Geert,
a fix has been pushed in the maintenance branch.
you can do a pf-maint.pl to apply the fixes.
Let me know if it helps.
Regards
Fabrice
Le 2018-10-01 à 08:02, Geert Heremans via PacketFence-users a écrit :
Hi,
I dived a little deeper into the documentation and from what I can
make of it bandwith accounting should be possible even in an
out-of-band deployment.
Unifi_PF_Radius_Settings.png
There is nothing much I can screw up in mij Unifi Settings here I
guess. So the fault must lie somewhere else.
Can anyone point me in the correct direction? Any help will be greatly
appreciated.
best regards,
Geert
Op do 27 sep. 2018 om 09:28 schreef Geert Heremans
<[email protected] <mailto:[email protected]>>:
Hello Peter,
thank you for the response. I was under the impression that Radius
Accounting would provide bandwith consumption statistics for the
connected clients.
Best regards,
Geert
Op di 25 sep. 2018 om 19:15 schreef Truax, Peter via
PacketFence-users <[email protected]
<mailto:[email protected]>>:
Geert,
I think the bandwidth numbers are only meaningful when you use
packetfence inline.
Regards,
Peter Truax
St. Martin’s University
*From:*Geert Heremans via PacketFence-users
<[email protected]
<mailto:[email protected]>>
*Sent:* Tuesday, September 25, 2018 12:46 AM
*To:* [email protected]
<mailto:[email protected]>
*Cc:* Geert Heremans <[email protected]
<mailto:[email protected]>>
*Subject:* [PacketFence-users] Unrealistic bandwith monotoring
results
Hello,
We are now running PF for one month in our school and so far
we are doing great. Besides some small problems with users
being confused about SSL certificate warnings I really can't
complain.
I'm running PF Out-Of-Band with a Ubuiqiti Unifi Wifi setup
and 802.1X authentication. I've also configured Radius
auditing but noticed that the numbers shown in PF could never
be correct.
Most of our users have use more than 100TB of bandwith. Surely
this can't be correct and there must be a configuration error
somewhere. Where should I start looking? On the unifi
controller there isn't much I can change besides the Radius
Server IP and port.
Thank you for your help.
Best regards,
Geert
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
