Hi All,

I have a simple setup where I only have one interface selected
(Management). Both deamons for Portal and RADIUS are loaded.

I want to be able to authentication via eCWP with my wireless APs. This has
all been setup and working. However once I enabled COA I was expecting to
be able to apply roles based on filter ID option (I have roles setup and
have changed to 'Role by Device Role').

The response shows correct, but the infrastructure does not apply the role.
Any ideas?

request_time 0
RADIUS Request User-Name = "8c-85-90-24-56-2a" CHAP-Password =
0xa83077f05b883eddadd9246a59a5c2cfeb NAS-IP-Address = 172.16.0.198 NAS-Port
= 0 Service-Type = Login-User Called-Station-Id =
"c4:13:e2:01:66:15:Reg_A3" Calling-Station-Id = "8c:85:90:24:56:2a"
NAS-Identifier = "AP-Bedroom" CHAP-Challenge =
0xb54d24dcfbc442fa1e90283934f7d4c6 NAS-Port-Type = Wireless-802.11
Acct-Session-Id = "D090C200282E38A1" Acct-Multi-Session-Id =
"17F5BF9B82E0EC78" Event-Timestamp = "Oct 26 2018 12:31:36 UTC"
Message-Authenticator = 0xea9a5a11cacdc6408b5d2e6069c10cfb
Stripped-User-Name = "8c-85-90-24-56-2a" Realm = "null"
FreeRADIUS-Client-IP-Address = 172.16.0.198 Called-Station-SSID = "Reg_A3"
Attr-26.26928.212 = 0x43342d31332d45322d30312d36362d3030 User-Password =
"******" SQL-User-Name = "8c-85-90-24-56-2a"
RADIUS Reply Filter-Id = "Corp"
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to