Hello Mehdi,

Import all your Mac using a CSV file under Node > Create.

It will register all the Mac address and during the import you will need to 
assign a role.

MAB, Mac authentication bypass is a RADIUS method. I think you want to use SNMP 
which is most commonly call Port-Security using a trap security event.

Thanks,

Ludovic Zammit
[email protected] <mailto:[email protected]> ::  +1.514.447.4918 (x145) ::  
www.inverse.ca <http://www.inverse.ca/>
Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu <http://www.sogo.nu/>) 
and PacketFence (http://packetfence.org <http://packetfence.org/>) 




> On Nov 8, 2018, at 11:35 AM, mehdi.mjahad--- via PacketFence-users 
> <[email protected]> wrote:
> 
> Hi,
> 
> We're trying to setup a wired MAC-based authorization system to dynamically 
> assign VLANs. We don't want to use RADIUS (not suitable for our needs), just 
> MAB.
> We don't have any AD but already a list of all MACs addresses, which may be 
> formatted to any format if needed.
> We thought PacketFence would be a great solution. The website (and the 
> documentation) describes a perfect suitable solution for our existing 
> infrastructure: Link Change SNMP Traps:
> https://packetfence.org/about.html#/vlan 
> <https://packetfence.org/about.html#/vlan>
> Our switches are Netgear GS748T (no Cisco in our infra) which only support 
> LinkUp/Down Traps. And since they're the same family than the documented 
> GS110 switch, we thought they would be usable with PF.
> We installed PF in Bypass mode but we can't figure how to implement the 
> solution. The main trouble is we can't figure out where to fill our MAC list 
> into PF.
> Do we need to create a VLAN filter for each MAC ? We're a bit lost since 
> wer'e PF beginners and we would be thankful for some help.
> 
> Regards
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users

_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to