Hello Kalcho, does packetfence receive a radius request from the controller ?
If yes can you paste a radius request/reply ? (check in radius audit log for that)
Regards Fabrice Le 19-01-03 à 10 h 09, Kalcho via PacketFence-users a écrit :
Hello all, I have configured Web Authentication for Cisco WLC as described in Network Devices Guide. I am using network 192.168.1.0/24 for this WiFi SSID, which is open with Mac filtering. I am using two access list Pre-Auth-For-WebRedirect-PF and Authorize_any. I have added WLC in the packetfence, and activated "Role by Switch Role": registration->Pre-Auth-For-WebRedirect-PF, and default->Authorize_any. These two access lists are defined on the WLC. Authorize_any permits everything, while Pre-Auth-For-WebRedirect-PF 1. permits DNS traffic 2. permits DHCP traffic 3. permit packets to Packetfence management interface as destination and source. I have also added portal role on management interface. Management interface is on 172.16.0.10. VLAN which is assigned to WiFi SSID interface uses network 192.168.1.0/24 which is routable and uses production DHCP hosted on L3 switch. Also it uses production DNS servers. Clients when connected receive correct DHCP address. I am having problem that not being redirected to the captive portal automatically. I can open it in browser, but no redirection. I guess this has something to do with the fact I am not using packetfence DHCP and DNS. _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
