Hi everyone My configuration is:
- 2960 Cisco sw - pfsense as firewall between vlans and also DHCP server - packetfence with mab and 802.1x authentication with Active Directory - packetfence having only one IP, in management vlan =20 - users having vlans from 21-26 ( packetfence doesn't have an IP in these ranges) As pf is not as DHCP server, it cannot bring users; IP address and Computer names after their authentication. I have tried enabling option 82 to fix this but with no luck. here is my sw option 82 configs: #show ip dhcp snooping > Switch DHCP snooping is enabled > DHCP snooping is configured on following VLANs: > 11 > DHCP snooping is operational on following VLANs: > 11 > DHCP snooping is configured on the following L3 Interfaces: > > Insertion of option 82 is enabled > circuit-id default format: vlan-mod-port > remote-id: 0021.5660.4480 (MAC) > Option 82 on untrusted port is allowed > Verification of hwaddr field is enabled > Verification of giaddr field is enabled > DHCP snooping trust/rate is configured on the following Interfaces: > > Interface Trusted Allow option Rate limit (pps) > ----------------------- ------- ------------ ---------------- > GigabitEthernet0/1 yes yes unlimited > Custom circuit-ids: > GigabitEthernet0/2 yes yes unlimited > Custom circuit-ids: On pf. option 82 and dhdp detect are checked. But nothing is showing as IP for my nodes. Could anyone help? How should I debug? Any related logs for example?
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
