Hi Everyone, I’m a student and doing a project, creating a small lab with 802.1x authentication.
I’m facing issues with the DHCP from PacketFence assigning the client an IP address. (Client doesn’t get an IP address on registration or isolation VLAN). I can successfully authenticate clients using PEAP but the client doesn’t receive a correct IP address of the VLAN it has been assigned to. Normally it will receive a 169.254.x.x IP address instead. For test purposes, clients receive VLAN 3 (Isolation VLAN) when they are successfully authenticated but they do not receive an IP address from the DHCP services provided by PacketFence. I checked the DHCP listener and it is listening on the eth0.3 (Isolation VLAN) interface in PacketFence. I also ran wireshark and there is a DHCPDISCOVER packet but there is no DHCPOFFER or any response. I’m lost at what else I can do. Can anybody help me with this issue? I can provide any config files if needed. Setup: PacketFenceZEN (8.3) VMWare Workstation 14 Player Cisco 2960 Switch Regards, Sean
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
