Hi, Yes it has all the default values, I can even see the request 192.95.20.194 in the laptop using wireshark : https://i.imgur.com/PMLK1y3.png
And I still get that error, I tried to change Redirection delay value to 40, and same result PD: Should I worry about this error on packetfence.log? : Apr 12 16:33:45 packetfence pfqueue: pfqueue(3670) WARN: [mac:c8:5b:76:e6:45:ef] Unable to match MAC address to IP '192.168.1.50' (pf::ip4log::ip2mac) El vie., 12 de abr. de 2019 a la(s) 17:00, Ludovic Zammit ( [email protected]) escribió: > Hello Leandro, > > It looks like that your device is being placed into the production vlan 10 > but the js script on your laptop is not able to reach > http://192.95.20.194/common/network-access-detection.gif > > Check into your web browser console for error in the network section while > it tries to fetch that gif file. > > Make sure to have the default settings. > > conf/pf.conf.defauts > > network_detection_ip = 192.95.20.194 > > image_path = /common/network-access-detection.gif > > Most of the time it’s because you need more than 20 secs for your device > to get the IP and get access to internet. > > Increase it under Configuration > Advance Access config > Captive portal > > Redirection delay > > Put 40 or 60 secs. > > Thanks, > > > Ludovic [email protected] :: +1.514.447.4918 (x145) :: www.inverse.ca > Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence > (http://packetfence.org) > > > > > > On Apr 12, 2019, at 3:46 PM, Leandro Ude <[email protected]> wrote: > > Hi, thanks to all for the help, > > Right now I'm trying to solve this issue : > > https://i.imgur.com/JQorvaV.png > > After that the network works (I have internet access) but the message is > always "unable to detect network" > > > As requested I'll attach the logs (txt file) when logging in , > /usr/local/pf/logs/radius-acct.log > /usr/local/pf/logs/packetfence.log > and > /usr/local/pf/var/run/radiusd-acct.sock > > > Thanks > > > > > > > > > > El vie., 12 de abr. de 2019 a la(s) 08:13, Nicolas Quiniou-Briand ( > [email protected]) escribió: > >> Hello, >> >> On 2019-04-11 7:26 p.m., Leandro Ude via PacketFence-users wrote: >> > I still can't get to work es network detection http message >> > >> > I still get the red message "unable to detect network" : >> >> Check packetfence.log for your MAC address to see if PF is able to >> disconnect correctly your device through RADIUS. >> -- >> Nicolas Quiniou-Briand >> [email protected] :: +1.514.447.4918 *140 :: https://inverse.ca >> Inverse inc. :: Leaders behind SOGo (https://sogo.nu), PacketFence >> (https://packetfence.org) and Fingerbank (http://fingerbank.org) >> > <logRadius.txt> > > >
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
