Hi, so I've deployed my Packetfence ZEN on VMware, i've followed the documentation :
https://packetfence.org/doc/PacketFence_Installation_Guide.html#_going_through_the_configurator and I've reach the testing part 5.7. Testing <https://packetfence.org/doc/PacketFence_Installation_Guide.html#_testing> If I'm correct, 1) by default ZEN is configured to use NAT on VM (The first time I open the .ova, the network configuration was set to NAT), 2) by default the IP address of the eth0 interface is set to a static address When I try to connect a client (a Windows 10 laptop) to my 2960 switch, the authentication prompt popped up, I entered both valid and invalid credentials, but the authentication failed, the documentation said : *"To see what’s going on from PacketFence, click on the Auditing tab from PacketFence’s admin interface. You should see an entry for the MAC address of your Microsoft Windows 7 endpoint" * but when I checked, there was nothing there.. My understanding is the switch has no way to communicate with the pf server in the VM since it is using NAT.. When I tried to change it to bridged connection to make the PF bridge my PC's ethernet connection, the IP address of the PF eth0 didn't change, so I change it to a valid IP address from my LAN segment, and I cannot access the configurator, or the admin page.. Can anyone help me please..? maybe I missed something or there is additional configuration I need for it to work? Thanks in advance
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
