Hello,
can you execute "ip a" on the linux box and paste the result ?
Regards
Fabrice
Le 19-10-11 à 22 h 21, 孙 国涛 via PacketFence-users a écrit :
I just started building the server. So I set interface like this
My server have a interface ens34 . it connected my switch G1/0/47
I have 3 vlan
1、Management 192.168.30.10/24 gw 192.168.30.1 default
gw vlan 30
2、Registration 192.168.20.10/24
vlan 20
3、Isolation 192.168.25.10/24 vlan 25
----------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------
My switch is H3C5500EI .I haven't done any ACL yet. it set like this
no other switch
vlan 20
#
vlan 25
#
vlan 30
interface GigabitEthernet1/0/33 //connect a pc ip is
192.168.20.11/24 gw 192.168.20.1 static
port link-mode bridge
port access vlan 20
#
interface GigabitEthernet1/0/48 // connect a pc ip is 192.168.30.11/24
gw 192.168.30.1 static
port link-mode bridge
port access vlan 30
#
interface GigabitEthernet1/0/47 //packetfence connected
port link-mode bridge
port link-type trunk
port trunk permit vlan all
port trunk pvid vlan 30
#
interface Vlan-interface20
ip address 192.168.20.1 255.255.255.0
dhcp select relay
dhcp relay server-select 1
#
interface Vlan-interface25
ip address 192.168.25.1 255.255.255.0
dhcp select relay
dhcp relay server-select 2
#
interface Vlan-interface30
ip address 192.168.30.1 255.255.255.0
#
----------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------
i connect GigabitEthernet1/0/48 set a ip 192.168.30.11/24 gw
192.168.30.1 with a PC
I use 192.168.30.11 PC ping 192.168.30.10 is ok but
I ping 192.168.20.10 is time out
ping 192.168.25.10 time out too
so I start find solution until I no intention to restart centos ,then
I ping 192.168.20.10 it ok .
then I think I Solve this. Life has taken my hand .after 20 min
timeout again .
so I find solution again . I find the law of events.when I run
systemctl restart network . ping 192.168.20.10 it ok .and after 20 min
it not work again
I run systemctl restart network . Although the network.service not
work ping 192.168.20.10 it ok.
----------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------
if i i connect GigabitEthernet1/0/33 set a ip 192.168.20.11/24 gw
192.168.20.1 with a PC
No matter what I run systemctl restart network or not run . this pc
cannot communication with any packetfence ip
ping 192.168.20.10 destination host unreachable
ping 192.168.30.10 timeout
ping 192.168.25.10 timeout
----------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------
I don’t know what happen .or it normal?
Looking forward to your reply
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
