Each vendor have specific ones. It’s the way they support voice, check their radius attributes documentation.
Thanks, > On May 6, 2020, at 7:51 PM, Bill Handler <bhand...@pcsknox.com> wrote: > > Ludovic, > > How do we add vendor-specific VSAs? > > Thanks, > > Bill > > Sent from my iPad > >> On May 6, 2020, at 8:09 AM, Ludovic Zammit <lzam...@inverse.ca> wrote: >> >> Hello Bill, >> >> You would have to rely on the Radius VOIP capabilities of those network >> equipment. >> >> PacketFence supports VOIP on HP/ Aruba switches. On the Aruba AP you would >> have to process the VOIP as a normal VLAN. You can try to check the VOIP >> flag under a mac address and connect it on a HP/ Aruba switch. You would >> need to have your voice VLAN marked as a voice clan under your switch. >> >> As per Extreme switch, we don’t support voice VSA. >> >> Thanks, >> >> Ludovic Zammit >> lzam...@inverse.ca :: +1.514.447.4918 (x145) :: www.inverse.ca >> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence >> (http://packetfence.org) >> >> >> >> >>> On May 6, 2020, at 8:00 AM, Bill Handler <bhand...@pcsknox.com> wrote: >>> >>> Extreme Networks and HP/Aruba switches/APs with a variety of VoIP phones - >>> yealink Avaya polycom etc >>> >>> Sent from my iPhone >>> >>>> On May 6, 2020, at 6:53 AM, Ludovic Zammit <lzam...@inverse.ca> wrote: >>>> >>>> Hello Bill, >>>> >>>> Which kind of equipment are you using ? >>>> >>>> Thanks, >>>> >>>> Ludovic Zammit >>>> lzam...@inverse.ca :: +1.514.447.4918 (x145) :: www.inverse.ca >>>> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence >>>> (http://packetfence.org) >>>> >>>> >>>> >>>> >>>>> On May 5, 2020, at 6:02 PM, Bill Handler via PacketFence-users >>>>> <packetfence-users@lists.sourceforge.net> wrote: >>>>> >>>>> Team, >>>>> >>>>> Is there a way to push a tagged VLAN to the switch when a device >>>>> authenticates? For example a VoIP phone, or AP. We’ve tested with a >>>>> phone with a PC on the passthrough port. The PC authenticates fine on >>>>> the correct VLAN, but we don’t know how to configure PF to send the phone >>>>> VLAN as tagged to the switch. >>>>> >>>>> Thanks, >>>>> >>>>> Bill >>>>> _______________________________________________ >>>>> PacketFence-users mailing list >>>>> PacketFence-users@lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users >>>> >>
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
