Had the same error on a Unifi AP.Was fixed by running:
/usr/local/pf/bin/pfcmd pfmon ubiquiti_ap_mac_to_ip
Graham
On Thursday, October 1, 2020, 02:28:40 PM EDT, Oley, Ronald via
PacketFence-users <[email protected]> wrote:
Running the latest version of Unifi controller and PacketFence. Followed the
PF setup guide exactly for the Ubiquiti setup (but some confusion on how to
handle Roles config for the Unifi Switch). When users connect to Unifi instead
of getting the captive poral page they get the error ""Not Implemented - GET to
/guest/s/94mbh3bf/ not supported" from PacketFence.
I did run the command per the guide to list out all the APs after they were
pulled in from the controller as a Switch, and the AP MAC is in the list.
I'm guessing the issue is somewhere in the Role config for the switch. We
aren't doing any VLAN flipping; I'm fine if they keep the same VLAN since Unifi
will trap them until they auth through the portal. So I tried no VLAN config,
as well as filling in the current VLAN for the registration and authed user
Roles. I also tried Web Auth URL with the URL Ubiquiti is trying to access.
No luck.
Anybody have this working with a Unifi controller?
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
