Hello chuck,

Did you change the target of the system back to cluster?

https://github.com/inverse-inc/packetfence/blob/devel/docs/PacketFence_Upgrade_Guide.asciidoc#rebooting-after-services-have-been-stopped
systemctl set-default packetfence-cluster.target

Thanks,

Ludovic Zammit
lzam...@inverse.ca <mailto:lzam...@inverse.ca> ::  +1.514.447.4918 (x145) ::  
www.inverse.ca <http://www.inverse.ca/>
Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu <http://www.sogo.nu/>) 
and PacketFence (http://packetfence.org <http://packetfence.org/>) 




> On Jan 14, 2021, at 1:06 PM, Chuck Gentry via PacketFence-users 
> <packetfence-users@lists.sourceforge.net> wrote:
> 
> So this was a cluster of three.  I decided to revert it back to a single 
> server.  I will say that I setup the cluster from an already in use single 
> installation.  Is that an issue?  It pulled all of the data from the first 
> and had no issue besides the iptables issue.
> 
> I also decided to do a cluster from a blank slate following the instructions 
> from the cluster guide.  I ran into an issue with the first server where you 
> get to the point of running /usr/local/pf/sbin/pf-mariadb --force-new-cluster
> When running this, the DB does not run on the 127.0.0.1 address even though 
> setting the config files from the guide.  Since it does not run on local, I 
> cannot continue.
> 
> Thank you for your response.  I was out for a while.
> 
> 
> 
> 
> 
> From: Durand fabrice via PacketFence-users 
> <packetfence-users@lists.sourceforge.net 
> <mailto:packetfence-users@lists.sourceforge.net>>
> Sent: Friday, January 8, 2021 9:33 PM
> To: packetfence-users@lists.sourceforge.net 
> <mailto:packetfence-users@lists.sourceforge.net> 
> <packetfence-users@lists.sourceforge.net 
> <mailto:packetfence-users@lists.sourceforge.net>>
> Cc: Durand fabrice <fdur...@inverse.ca <mailto:fdur...@inverse.ca>>
> Subject: Re: [PacketFence-users] Issue with iptables and cllustering
>  
> Hello Chuck,
> 
> is it a cluster of 3 ?
> 
> Because the line 313 refer to @ha_ints which is used for a cluster of 2 (old 
> cluster config).
> Did you defined ha interfaces in pf.conf ?
> 
> Regards
> Fabrice
> 
> 
> Le 21-01-04 à 09 h 14, Chuck Gentry via PacketFence-users a écrit :
>> Every since I have configured a cluster, I am unable to start the iptables 
>> module.  
>> 
>> Error that I am receiving in the journal.
>> Can't locate object method "STORE" via package "pfconfig::cached_array" at 
>> /usr/local/pf/lib/pf/iptables.pm line 313. 
>> (pf::iptables::generate_filter_if_src_to_chain)
>> 
>> PF version 10.2.0, ZEN deployment
>> 
>> Things to note, I have 3 VLAN interfaces configured, type: other, portal, 
>> registration.  I am not using any of these interfaces at the moment.  I was 
>> just playing around with them.  They are in the cluster.conf
>> 
>> Thank you in advance.
>> 
>> 
>> Confidentiality Notice: This email message, including any attachments, is 
>> for the sole use of the intended recipient(s) and may contain confidential 
>> and privileged information. Any unauthorized review, use, disclosure or 
>> distribution is prohibited. If you are not the intended recipient, please 
>> contact the sender by reply email and destroy all copies of the original 
>> message.
>> 
>> 
>> 
>> _______________________________________________
>> PacketFence-users mailing list
>> PacketFence-users@lists.sourceforge.net 
>> <mailto:PacketFence-users@lists.sourceforge.net>
>> https://lists.sourceforge.net/lists/listinfo/packetfence-users 
>> <https://lists.sourceforge.net/lists/listinfo/packetfence-users>
> CAUTION: This email originated from outside of TORC's email system. DO NOT 
> click links or open attachments unless you recognize the sender and know the 
> content is safe. Email is NOT a secure means of communication. Handle 
> potentially sensitive information with care.
> Confidentiality Notice: This email message, including any attachments, is for 
> the sole use of the intended recipient(s) and may contain confidential and 
> privileged information. Any unauthorized review, use, disclosure or 
> distribution is prohibited. If you are not the intended recipient, please 
> contact the sender by reply email and destroy all copies of the original 
> message.
> _______________________________________________
> PacketFence-users mailing list
> PacketFence-users@lists.sourceforge.net 
> <mailto:PacketFence-users@lists.sourceforge.net>
> https://lists.sourceforge.net/lists/listinfo/packetfence-users 
> <https://lists.sourceforge.net/lists/listinfo/packetfence-users>

_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to