Precisely and simply, this is what I want to do: A device plugs into the switch; is this device part of my AD? If yes, it joins my company VLAN, if not, it joins an isolation VLAN.
I really need your help because this is an important and decisive project for me. I think the problem is that I don't know exactly how and what commands I need to perform on my switch and in packetfence to achieve this. Thank you in advance for your answer. [rcortat]<http://www.imageson.ch/> [logoBNJ]<http://www.bnjpublicite.ch/> [logoRJB]<http://www.rjb.ch/> [logoRTN]<http://www.rtn.ch/> [logoRFJ]<http://www.rfj.ch/> [logoGRRIF]<http://www.grrif.ch/> [https://medias.bnj.ch/Mails/Common/isFooter.jpg]<https://redir.bnj.ch/site/IS> De : Robin Cortat Envoyé : mardi, 9 mars 2021 07:15 À : 'packetfence-users@lists.sourceforge.net' <packetfence-users@lists.sourceforge.net> Cc : Durand fabrice <fdur...@inverse.ca> Objet : RE: [PacketFence-users] VLANs assignation for HP Procurve 2824 switch Hello, Theoretically, there are 2 VLANs on the switch. I followed the Network Devices Configuration Guide to configure my switch, the HP ProCurve 2500 Series chapter. On PacketFence, I linked my AD and added my switch. I created a connection profile saying that if the device that plugs into my switch was part of the AD, it would be on VLAN 1, and if it wasn't, it would be on VLAN 2. But there is no indication that it works. Is what I did theoretically correct? De : Durand fabrice via PacketFence-users <packetfence-users@lists.sourceforge.net<mailto:packetfence-users@lists.sourceforge.net>> Envoyé : mardi, 9 mars 2021 02:53 À : packetfence-users@lists.sourceforge.net<mailto:packetfence-users@lists.sourceforge.net> Cc : Durand fabrice <fdur...@inverse.ca<mailto:fdur...@inverse.ca>> Objet : Re: [PacketFence-users] VLANs assignation for HP Procurve 2824 switch Hello Robin, what is the configuration you applied on the switch ? What have been done on the packetfence side ? Do you have any logs ? Regards Fabrice Le 21-03-08 à 10 h 15, Robin Cortat via PacketFence-users a écrit : Hello, I use an HP ProCurve 2824 switch, and the only thing I would like to do with PacketFence is to assign VLANs to devices that would connect to the switch based on authentication rules. Unfortunately, after hours and hours of reading documentation and testing, I did not get what I wanted. Isn't there a simple way to achieve this solution? Thank you very much for your answer. _______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net<mailto:PacketFence-users@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
