Hi Ludovic,
I get these logs:

test-nac pfqueue: pfqueue(26336) INFO: [mac:a0:8c:fd:ed:a5:1c] security
traps are configured on (191.191.28.28) ifIndex 27. Re-assigning VLAN
(pf::api::_reassignSNMPConnections)
test-nac pfqueue: pfqueue(26336) INFO: [mac:a0:8c:fd:ed:a5:1c] Instantiate
profile snmp-trap (pf::Connection::ProfileFactory::_from_profile)
test-nac pfqueue: pfqueue(26336) INFO: [mac:a0:8c:fd:ed:a5:1c] Username was
NOT defined or unable to match a role - returning node based role 'default'
(pf::role::getRegisteredRole)
test-nac pfqueue: pfqueue(26336) INFO: [mac:a0:8c:fd:ed:a5:1c] PID:
"default", Status: reg Returned VLAN: (undefined), Role: default
(pf::role::fetchRoleForNode)
test-nac pfqueue: pfqueue(26336) INFO: [mac:a0:8c:fd:ed:a5:1c] setting VLAN
at 191.191.28.28 ifIndex 27 from 25 to 26 (pf::Switch::setVlan)
test-nac pfqueue: pfqueue(26336) WARN: [mac:a0:8c:fd:ed:a5:1c] couldn't get
MAC at ifIndex 27. This is a problem. (pf::Switch::_getMacAtIfIndex)
test-nac pfqueue: pfqueue(26336) INFO: [mac:a0:8c:fd:ed:a5:1c] determining
through discovery protocols if 191.191.28.28 ifIndex 27 has VoIP phone
connected (pf::Switch::hasPhoneAtIfIndex)
test-nac pfqueue: pfqueue(26336) WARN: [mac:a0:8c:fd:ed:a5:1c] SNMP
get_request for 1.3.6.1.4.1.9.9.23.1.2.1.1.6
(pf::Switch::Cisco::getPhonesCDPAtIfIndex)
test-nac pfqueue: pfqueue(26336) INFO: [mac:a0:8c:fd:ed:a5:1c] We found an
IP phone through discovery protocols for ifIndex 27
(pf::Switch::getPhonesDPAtIfIndex)
test-nac pfqueue: pfqueue(26336) WARN: [mac:a0:8c:fd:ed:a5:1c] VLAN changed
and is behind VoIP phone. Not bouncing the port!
(pf::api::_reassignSNMPConnections)

Thanks,
Daniele

Il giorno ven 26 mar 2021 alle ore 13:01 Ludovic Zammit <[email protected]>
ha scritto:

> Hello Daniele,
>
> It should bounce the port even if a phone is connected.
>
> Thanks,
>
>
> Ludovic Zammit
> [email protected] ::  +1.514.447.4918 (x145) ::  www.inverse.ca
> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence 
> (http://packetfence.org)
>
>
>
>
>
>
>
>
> On Mar 25, 2021, at 3:46 AM, Daniele via PacketFence-users <
> [email protected]> wrote:
>
>
> Hi all,
> I'm testing snmp-portsecurity mode on a Cisco 4500 series switch.
> When a new device is connected to the port, the switch sends the trap 
> security violation and packetfence puts the port on the registration vlan.
> The problem is, when there is also a voip phone on the same port, PF doesn't 
> bounce the port so that the DHCP client does not make a new request.
> Is there a way to force ports to bounce when the voip phone is also present?
> The same problem occurs when the device is registered from the portal and it 
> is put on the production vlan.
>
> Best Regards,
> Daniele
>
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
>
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to