Good morning everyone!
Is there a way that we could do math or convert a VLAN to Hex in a switch
template? I've been looking to use that for our Extreme/Avaya switches that use
EAP MultiHost for their radius answers and need to have the VLAN Egress VLAN-ID
returned in a different format.
Right now, I have every VLAN going through a VLAN filter, which complicates
adding roles to the switches.
Our filters look like this:
'WiredVLAN-8' => {
'answer.1' => 'reply:Tunnel-Medium-Type = 6',
'status' => 'enabled',
'answer.0' => 'reply:Tunnel-Type = 13',
'top_op' => 'and',
'description' => VLAN 8',
'scopes' => 'returnRadiusAccessAccept',
'answer.3' => 'reply:Egress-VLANID = 0x32000008',
'merge_answer' => 'no',
'answer.2' => 'reply:Tunnel-Private-Group-Id = 8',
'condition' => 'mac =~ ".*" && vlan == "8"'
},
The 'reply:Egress-VLANID = 0x32000008' uses RFC4675, with 0x31 for tagged, and
0x32 for untagged, and the VLAN in Hex at the back. With 0's padding the middle.
Ex. VLAN 17 as a tagged egress VLAN would be 0x31000011.
Ideally, we'd have support for 802.1ad or VxLAN. But, that could be something
they're adding in a future release. I'm not sure. I could submit a feature
request. But, if it's already possible, I won't worry about it.
Thank you for your time.
Cheers,
Chris
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
