Hello Abdoul, packetfence is already aware of the dhcp traffic on the isolation/registration networks, so there nothing to do. For the production network, you can do 2 things:
use the ip helper address command on each production vlan (on the cisco switch): ip helper-address address or use that https://www.packetfence.org/doc/PacketFence_Installation_Guide.html#_dhcp_remote_sensor and enable "process on dhcp ack" on packetfence Btw i prefer the 2nd solution which is more accurate. Regards Fabrice Le mer. 28 avr. 2021 à 06:57, Abdoul Raouf Diabagate via PacketFence-users < packetfence-users@lists.sourceforge.net> a écrit : > Hello, please does anyone know how to send a copy of the dhcp traffic from > the registration interface to the management interface? > > My goal is to activate WMI scans > > Le jeu. 15 avr. 2021 à 10:10, Abdoul Raouf Diabagate < > abdoulrao...@gmail.com> a écrit : > >> Hello dear Experts and Users of packetfence. >> i still have this problem with the wmi scan ... can someone please help >> me? >> when I type the following command: >> >> wmic -U [domain/]adminuser%password //host "select * from >> Win32_ComputerSystem” >> >> Packetfence responds to me with the information from the client computer. >> name, system version etc ... But from the graphical interface it is always >> impossible to launch the scan before or after recording. I was suggested to >> send a copy of the DHCP traffic from my production network to the >> packetfence management interface. Anyone know how to do this? for >> information. I have a cisco catalyst 2960 switch, which is connected to my >> packetfence server. one port for management and one port for the trunk. >> >> [image: image.png] >> >> Le jeu. 11 mars 2021 à 13:55, Abdoul Raouf Diabagate < >> abdoulrao...@gmail.com> a écrit : >> >>> Hello everybody. >>> >>> I installed packetfence following the instructions in the guide. and >>> everything works fine. However, scanning computers before registration does >>> not work. I configured WMI and added an AD domain administrator account. >>> >>> When the user logs into the captive portal, he displays a message saying >>> that the computer is being scanned and a security event is opened in >>> packetfence, but nothing happens after that. >>> >>> here is the message when I type a request through the command line: >>> wmic -U mydomain / myuser // targetIP "select * from FirewallProduct" >>> [wmi / wmic.c: 212: main ()] ERROR: Retrieve result data. >>> NTSTATUS: NT code 0x80041010 - NT code 0x80041010 >>> >>> My goal is to be able to isolate windows computers that do not have an >>> antivirus installed. how can i do it please? >>> >> _______________________________________________ > PacketFence-users mailing list > PacketFence-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/packetfence-users >
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
