Hello Victor, It must be another issue because I have deployed recently let’s encrypt setup and it worked.
I think the issue is somewhere else. Thanks, Ludovic Zammit Product Support Engineer Principal Cell: +1.613.670.8432 Akamai Technologies - Inverse 145 Broadway Cambridge, MA 02142 Connect with Us: <https://community.akamai.com/> <http://blogs.akamai.com/> <https://twitter.com/akamai> <http://www.facebook.com/AkamaiTechnologies> <http://www.linkedin.com/company/akamai-technologies> <http://www.youtube.com/user/akamaitechnologies?feature=results_main> > On May 24, 2021, at 11:21 AM, Ezeh Victor <vickeyzed...@gmail.com> wrote: > > Hi Ludovic, > > I have been researching on how to resolve this issue and one way is to verify > if the ciphersuites on host and server end match. > > In my research I came across this directory that gives me the openssl > ciphersuite in use by PacketFence - usr/bin/openssl ciphers -v > > Since I have implemented a 3rd party certificate, would this be the right > directory to check? > > I have no idea where to check since I did the whole implementation from the > GUI. > > Kindly assist me with the directory to check to confirm the ciphersuites in > use on the server end. > > On Sat, 22 May 2021 at 22:39, Ezeh Victor <vickeyzed...@gmail.com > <mailto:vickeyzed...@gmail.com>> wrote: > This is the error received on the PC browser (Internet Edge) > > <image.jpeg> > > > On Sat, 22 May 2021 at 22:29, Ezeh Victor <vickeyzed...@gmail.com > <mailto:vickeyzed...@gmail.com>> wrote: > Hi Ludovic, > > This is another error seen when the radius log is checked; > <image.png> > > What could cause this because the portal is not inactive. > > On Fri, 21 May 2021 at 20:24, Ezeh Victor <vickeyzed...@gmail.com > <mailto:vickeyzed...@gmail.com>> wrote: > Hi Ludovic, > > I was still going through the logs and I think i found the error; > <image.png> > > <image.png> > > So there is an SSL handshake failure. I do not understand the reason for this > error. > > Is there a fix for this issue as I believe this is the reason the portal does > not come up. > > I checked the date and time on the box, but that does not seem to be the issue > > On Fri, 21 May 2021 at 19:41, Ezeh Victor <vickeyzed...@gmail.com > <mailto:vickeyzed...@gmail.com>> wrote: > Hi Ludovic, > > Using the IP also gives the same result. > > This is the link it tries to reach: > https://self-service.dangote-group.com/Cisco::WLC/sid519d0a?&redirect=www.msftconnecttest.com/redirect > > <https://urldefense.com/v3/__https://self-service.dangote-group.com/Cisco::WLC/sid519d0a?&redirect=www.msftconnecttest.com*redirect__;Lw!!GjvTz_vk!CjOQiDD_Fdlivu6OZxgD-T8StrobOEyNZL1Pl3mGzcyQLwA6C32OLqGjyz9t0g$> > > Checking through the logs harproxy_portal.log, there is no trace of the user. > > On Fri, 21 May 2021 at 17:16, Zammit, Ludovic <luza...@akamai.com > <mailto:luza...@akamai.com>> wrote: > In the url on the portal, is it HTTP or HTTPS ? > > What happen if you put the IP instead of the fqdn ? > > Thanks, > > Ludovic Zammit > Product Support Engineer Principal > > Cell: +1.613.670.8432 > Akamai Technologies - Inverse > 145 Broadway > Cambridge, MA 02142 > Connect with Us: <https://community.akamai.com/> > <http://blogs.akamai.com/> > <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!CjOQiDD_Fdlivu6OZxgD-T8StrobOEyNZL1Pl3mGzcyQLwA6C32OLqGLe5dNfg$> > > <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!CjOQiDD_Fdlivu6OZxgD-T8StrobOEyNZL1Pl3mGzcyQLwA6C32OLqEVZrTamQ$> > > <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!CjOQiDD_Fdlivu6OZxgD-T8StrobOEyNZL1Pl3mGzcyQLwA6C32OLqFNihBbgg$> > > <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!CjOQiDD_Fdlivu6OZxgD-T8StrobOEyNZL1Pl3mGzcyQLwA6C32OLqEe6lE17g$> > >> On May 21, 2021, at 11:56 AM, Ezeh Victor <vickeyzed...@gmail.com >> <mailto:vickeyzed...@gmail.com>> wrote: >> >> Hi Ludovic, >> >> I can reach the PF management interface as shown below; >> >> <image.png> >> >> On Fri, 21 May 2021 at 16:40, Zammit, Ludovic <luza...@akamai.com >> <mailto:luza...@akamai.com>> wrote: >> Ping the DNS name, can you reach the PF management interface ? >> >> Thanks, >> >> Ludovic Zammit >> Product Support Engineer Principal >> >> Cell: +1.613.670.8432 >> Akamai Technologies - Inverse >> 145 Broadway >> Cambridge, MA 02142 >> Connect with Us: <https://community.akamai.com/> >> <http://blogs.akamai.com/> >> <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!E56aE4ee-NtHDi-SckGp2FeG6-_C_nCitrQEVyw3t4IAojMdFvs0DewBEWd34A$> >> >> <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!E56aE4ee-NtHDi-SckGp2FeG6-_C_nCitrQEVyw3t4IAojMdFvs0DexOrGCc5w$> >> >> <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!E56aE4ee-NtHDi-SckGp2FeG6-_C_nCitrQEVyw3t4IAojMdFvs0Dexcwaotrw$> >> >> <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!E56aE4ee-NtHDi-SckGp2FeG6-_C_nCitrQEVyw3t4IAojMdFvs0Dez-odDWYA$> >> >>> On May 21, 2021, at 9:33 AM, Ezeh Victor <vickeyzed...@gmail.com >>> <mailto:vickeyzed...@gmail.com>> wrote: >>> >>> Hi Ludovic, >>> >>> Thank you. You were right. >>> >>> The internal radius service was up and I had to stop it >>> <image.png> >>> >>> <image.png> >>> >>> I restarted the radius service on PF and it came up; >>> <image.png> >>> >>> <image.png> >>> >>> The challenge now is that the captive portal is still not available but >>> this time, the browser tries to go the URL of the captive portal when a >>> user connects as shown below; >>> <image.png> >>> >>> The Haproxy-portal and httpd-portal services are up and running as shown >>> below; >>> >>> <image.png> >>> >>> <image.png> >>> >>> >>> Is there any other dependency I should review? >>> >>> On Fri, 21 May 2021 at 13:59, Zammit, Ludovic <luza...@akamai.com >>> <mailto:luza...@akamai.com>> wrote: >>> It looks like you have another radius process running. >>> >>> bin/pfcmd service pf stop >>> >>> ps -edf | grep radiusd >>> >>> pkill -f -9 radiusd >>> >>> bin/pfcmd service pf start >>> >>> See if it fixes it, otherwise look at the radiusd log to see what’s going >>> on. >>> >>> radiusd -d /usr/local/pf/raddb -n auth -CX >>> >>> Thanks, >>> >>> Ludovic Zammit >>> Product Support Engineer Principal >>> >>> Cell: +1.613.670.8432 >>> Akamai Technologies - Inverse >>> 145 Broadway >>> Cambridge, MA 02142 >>> Connect with Us: <https://community.akamai.com/> >>> <http://blogs.akamai.com/> >>> <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!GD1Y1VN7hlfRxpFUozPldn0PUiUN1_-qy4jFAuM1puSQI_BAYDYelx7rvFZ_4A$> >>> >>> <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!GD1Y1VN7hlfRxpFUozPldn0PUiUN1_-qy4jFAuM1puSQI_BAYDYelx64xH5k5w$> >>> >>> <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!GD1Y1VN7hlfRxpFUozPldn0PUiUN1_-qy4jFAuM1puSQI_BAYDYelx7x4pBIPA$> >>> >>> <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!GD1Y1VN7hlfRxpFUozPldn0PUiUN1_-qy4jFAuM1puSQI_BAYDYelx4SdnhE_g$> >>> >>>> On May 21, 2021, at 5:44 AM, Ezeh Victor <vickeyzed...@gmail.com >>>> <mailto:vickeyzed...@gmail.com>> wrote: >>>> >>>> Hi Ludovic, >>>> >>>> Further checks revealed this; >>>> <image.png> >>>> >>>> Attempted to start the radius service failed and there is no information >>>> on the service using port 1812 that is hindering the service from starting. >>>> >>>> On Fri, 21 May 2021 at 10:31, Ezeh Victor <vickeyzed...@gmail.com >>>> <mailto:vickeyzed...@gmail.com>> wrote: >>>> Hi Ludovic, >>>> >>>> I have restarted all PF services, the hostname set to self-service, domain >>>> set to dangote-group.com >>>> <https://urldefense.com/v3/__http://dangote-group.com__;!!GjvTz_vk!G_FYqU73Hvd_S3hjH0pz2nsxM960sjT_m-Tnd-5fgLV9Lo-gA231JLR_UPUQbQ$> >>>> and the result is same. >>>> >>>> I checked Radius Logs and this is what I observed; >>>> <image.png> >>>> >>>> That is the reason why the service has refused to start as seen below; >>>> <image.png> >>>> >>>> Efforts to start the service have failed. Any ideas please as this is >>>> vital to the configuration as highlighted by PF >>>> >>>> At the moment, the SSL for Radius uses Let's Encrypt as seen below; >>>> <image.png> >>>> <image.png> >>>> >>>> And the HTTP SSL uses Godaddy; >>>> <image.png> >>>> >>>> Will this affect the response or redirection to the portal? >>>> >>>> On Thu, 20 May 2021 at 16:15, Zammit, Ludovic <luza...@akamai.com >>>> <mailto:luza...@akamai.com>> wrote: >>>> Keep that ACL and change the URL returned in the radius reply. >>>> >>>> Do you see the captive portal ? >>>> >>>> Restart all PF service once you changed the host and domain name. >>>> >>>> Thanks, >>>> >>>> Ludovic Zammit >>>> Product Support Engineer Principal >>>> >>>> Cell: +1.613.670.8432 >>>> Akamai Technologies - Inverse >>>> 145 Broadway >>>> Cambridge, MA 02142 >>>> Connect with Us: <https://community.akamai.com/> >>>> <http://blogs.akamai.com/> >>>> <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!G_FYqU73Hvd_S3hjH0pz2nsxM960sjT_m-Tnd-5fgLV9Lo-gA231JLRJkmCAIA$> >>>> >>>> <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!G_FYqU73Hvd_S3hjH0pz2nsxM960sjT_m-Tnd-5fgLV9Lo-gA231JLRbtvD2jg$> >>>> >>>> <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!G_FYqU73Hvd_S3hjH0pz2nsxM960sjT_m-Tnd-5fgLV9Lo-gA231JLRCjzGrVg$> >>>> >>>> <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!G_FYqU73Hvd_S3hjH0pz2nsxM960sjT_m-Tnd-5fgLV9Lo-gA231JLRSbpIVUw$> >>>> >>>>> On May 20, 2021, at 11:12 AM, Ezeh Victor <vickeyzed...@gmail.com >>>>> <mailto:vickeyzed...@gmail.com>> wrote: >>>>> >>>>> Hi Ludovic, >>>>> >>>>> Reviewing the configuration on WLC, there is an ACL in use to redirect >>>>> users that connect to the SSID of interest to PF captive portal; >>>>> <image.png> >>>>> >>>>> I cannot use the DNS name here like I did in PF but from my initial >>>>> response, the name resolves to the IP in the ACL which I believe should >>>>> work. >>>>> >>>>> Could this be the problem? >>>>> >>>>> On Thu, 20 May 2021 at 15:44, Ezeh Victor <vickeyzed...@gmail.com >>>>> <mailto:vickeyzed...@gmail.com>> wrote: >>>>> Hi Ludovic, >>>>> >>>>> Kindly find my observations below; >>>>> >>>>> After certificate installation, I still receive this; >>>>> <image.png> >>>>> >>>>> Your recommendations were followed in your previous email and the config >>>>> was changed to https://self-service.dangote-group.com/Cisco::WLC >>>>> <https://urldefense.com/v3/__https://self-service.dangote-group.com/Cisco::WLC__;!!GjvTz_vk!HrDX1Mox1tt24FNmEoFficJm4MvIuCLEM0jEgCeKrctu9xpKVLUVPqeKprbLQg$> >>>>> and this time around there was not even a prompt from the browser to go >>>>> to the captive portal. >>>>> >>>>> Attempts to visit a site to trigger the captive portal only returned this; >>>>> <image.jpeg> >>>>> >>>>> This is the dns resolution; >>>>> <image.png> >>>>> >>>>> On Thu, 20 May 2021 at 14:25, Zammit, Ludovic <luza...@akamai.com >>>>> <mailto:luza...@akamai.com>> wrote: >>>>> Hello Victor, >>>>> >>>>> <PastedGraphic-8.tiff> >>>>> >>>>> Here put the dns name of the portal: >>>>> https://self-service.dangote-group.com/Cisco::WLC >>>>> <https://urldefense.com/v3/__https://self-service.dangote-group.com/Cisco::WLC__;!!GjvTz_vk!HrDX1Mox1tt24FNmEoFficJm4MvIuCLEM0jEgCeKrctu9xpKVLUVPqeKprbLQg$> >>>>> >>>>> The issue now is to make sure that dns name revolves the PF management >>>>> interface either local IP or Public IP from the guest (where the device >>>>> sits) network. >>>>> >>>>> Thanks, >>>>> >>>>> Ludovic Zammit >>>>> Product Support Engineer Principal >>>>> >>>>> Cell: +1.613.670.8432 >>>>> Akamai Technologies - Inverse >>>>> 145 Broadway >>>>> Cambridge, MA 02142 >>>>> Connect with Us: <https://community.akamai.com/> >>>>> <http://blogs.akamai.com/> >>>>> <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!HrDX1Mox1tt24FNmEoFficJm4MvIuCLEM0jEgCeKrctu9xpKVLUVPqfwdi8GTA$> >>>>> >>>>> <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!HrDX1Mox1tt24FNmEoFficJm4MvIuCLEM0jEgCeKrctu9xpKVLUVPqcdld1VvA$> >>>>> >>>>> <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!HrDX1Mox1tt24FNmEoFficJm4MvIuCLEM0jEgCeKrctu9xpKVLUVPqfapp-Prg$> >>>>> >>>>> <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!HrDX1Mox1tt24FNmEoFficJm4MvIuCLEM0jEgCeKrctu9xpKVLUVPqdXqzAMUA$> >>>>> >>>>>> On May 20, 2021, at 9:21 AM, Ezeh Victor <vickeyzed...@gmail.com >>>>>> <mailto:vickeyzed...@gmail.com>> wrote: >>>>>> >>>>>> Hi Ludovic, >>>>>> >>>>>> Let me kindly explain the scenario here....... >>>>>> >>>>>> The PF server's internal IP is 172.31.2.89 and resolves internally to >>>>>> self-service.dangote-group.com >>>>>> <https://urldefense.com/v3/__http://self-service.dangote-group.com__;!!GjvTz_vk!DpjgWo5gP1LIs1voosgx1XXcF6o5Eymyy_GJIIElLnneSnYkbBldTzwgo0Br6w$>. >>>>>> >>>>>> We needed Sponsors to be able to approve guest requests over the >>>>>> internet without the need for VPN, so a public DNS mapping was done for >>>>>> the same name to 80.88.10.20 to make that happen. >>>>>> >>>>>> The hostname of PF server is; >>>>>> >>>>>> <image.png> >>>>>> >>>>>> There is no special configuration for web authentication re-direct as >>>>>> the default setup for the captive portal is being used. >>>>>> >>>>>> This is the switch config; >>>>>> <image.png> >>>>>> >>>>>> Should I change the IP information for the registration URL to the >>>>>> public IP? >>>>>> >>>>>> On Thu, 20 May 2021 at 12:34, Zammit, Ludovic <luza...@akamai.com >>>>>> <mailto:luza...@akamai.com>> wrote: >>>>>> I’m no mastermind but self-service.dangote-group.com >>>>>> <https://urldefense.com/v3/__http://self-service.dangote-group.com__;!!GjvTz_vk!DpjgWo5gP1LIs1voosgx1XXcF6o5Eymyy_GJIIElLnneSnYkbBldTzwgo0Br6w$> >>>>>> is different from 172.31.2.89. >>>>>> >>>>>> Make sure that you have the correct hostname and domain under >>>>>> Configuration > System Configuration > General configuration >>>>>> >>>>>> If you are using web auth redirection change your URL as well either >>>>>> from the switch config in PF or the switch / controller itself. >>>>>> >>>>>> Thanks, >>>>>> >>>>>> Ludovic Zammit >>>>>> Product Support Engineer Principal >>>>>> >>>>>> Cell: +1.613.670.8432 >>>>>> Akamai Technologies - Inverse >>>>>> 145 Broadway >>>>>> Cambridge, MA 02142 >>>>>> Connect with Us: <https://community.akamai.com/> >>>>>> <http://blogs.akamai.com/> >>>>>> <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!DpjgWo5gP1LIs1voosgx1XXcF6o5Eymyy_GJIIElLnneSnYkbBldTzyyXBe2sA$> >>>>>> >>>>>> <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!DpjgWo5gP1LIs1voosgx1XXcF6o5Eymyy_GJIIElLnneSnYkbBldTzxMMvUVXw$> >>>>>> >>>>>> <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!DpjgWo5gP1LIs1voosgx1XXcF6o5Eymyy_GJIIElLnneSnYkbBldTzw4ZKXRvA$> >>>>>> >>>>>> <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!DpjgWo5gP1LIs1voosgx1XXcF6o5Eymyy_GJIIElLnneSnYkbBldTzxdUL6X1A$> >>>>>> >>>>>>> On May 19, 2021, at 6:26 PM, Ezeh Victor <vickeyzed...@gmail.com >>>>>>> <mailto:vickeyzed...@gmail.com>> wrote: >>>>>>> >>>>>>> Hi Ludovic, >>>>>>> >>>>>>> Thank you. >>>>>>> >>>>>>> The Let's Encrypt option was successful as seen below and the >>>>>>> haproxy-admin service was restarted >>>>>>> >>>>>>> <image.png> >>>>>>> >>>>>>> >>>>>>> When users try tried to access the captive portal, it was stuck on this >>>>>>> page. >>>>>>> >>>>>>> <image.png> >>>>>>> >>>>>>> All PF services were stopped and started again and users could no >>>>>>> longer access the page above that will enable them to access the >>>>>>> captive portal. >>>>>>> >>>>>>> kindly assist as this will affect users by resumption. >>>>>>> >>>>>>> On Wed, 19 May 2021 at 20:35, Zammit, Ludovic <luza...@akamai.com >>>>>>> <mailto:luza...@akamai.com>> wrote: >>>>>>> The let’s encrypt integration with PF is pretty simple, it’s baed of >>>>>>> the HTTP challenge. >>>>>>> >>>>>>> If you want to use let’s encrypt service, your DNS name >>>>>>> self-service.dangote-group.con needs to resolve a public IP address >>>>>>> that is bind to the management interface over 443 and 80. >>>>>>> >>>>>>> Thanks, >>>>>>> >>>>>>> Ludovic Zammit >>>>>>> Product Support Engineer Principal >>>>>>> >>>>>>> Cell: +1.613.670.8432 >>>>>>> Akamai Technologies - Inverse >>>>>>> 145 Broadway >>>>>>> Cambridge, MA 02142 >>>>>>> Connect with Us: <https://community.akamai.com/> >>>>>>> <http://blogs.akamai.com/> >>>>>>> <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!G9vGOTkM6sqOIWJGYig9QvaqBKePkEkTKYSjwBMaDI-M06He7AhwSM7HPuJdbQ$> >>>>>>> >>>>>>> <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!G9vGOTkM6sqOIWJGYig9QvaqBKePkEkTKYSjwBMaDI-M06He7AhwSM5_CpBuXg$> >>>>>>> >>>>>>> <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!G9vGOTkM6sqOIWJGYig9QvaqBKePkEkTKYSjwBMaDI-M06He7AhwSM7Jgb9D1g$> >>>>>>> >>>>>>> <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!G9vGOTkM6sqOIWJGYig9QvaqBKePkEkTKYSjwBMaDI-M06He7AhwSM7Q7-BCow$> >>>>>>> >>>>>>>> On May 19, 2021, at 1:29 PM, Ezeh Victor <vickeyzed...@gmail.com >>>>>>>> <mailto:vickeyzed...@gmail.com>> wrote: >>>>>>>> >>>>>>>> HIi, >>>>>>>> >>>>>>>> My packetfence version is v10.2.0. >>>>>>>> >>>>>>>> I tried using the GUI to upload the required files. >>>>>>>> the private key generated when generating a .csr file was used in >>>>>>>> conjunction with the .crt file and this was the error message >>>>>>>> >>>>>>>> <image.png> >>>>>>>> >>>>>>>> Generating the .csr from the GUI does not generate a private key to be >>>>>>>> used in filling the data requirements. >>>>>>>> >>>>>>>> How can I tackle this? >>>>>>>> >>>>>>>> Also, trying out the let's encrypt option gives this error when >>>>>>>> testing public access >>>>>>>> >>>>>>>> <image.png> >>>>>>>> >>>>>>>> What is the procedure to use either? >>>>>>>> >>>>>>>> On Wed, 19 May 2021 at 13:00, Zammit, Ludovic <luza...@akamai.com >>>>>>>> <mailto:luza...@akamai.com>> wrote: >>>>>>>> Hello, >>>>>>>> >>>>>>>> Which PacketFence version are you using ? If it’s a version > v10 use >>>>>>>> the GUI for it, otherwise, the server.pem is a bundle of : server.key >>>>>>>> server.crt and intermediates if any. >>>>>>>> >>>>>>>> Thanks, >>>>>>>> >>>>>>>> Ludovic Zammit >>>>>>>> Product Support Engineer Principal >>>>>>>> >>>>>>>> Cell: +1.613.670.8432 >>>>>>>> Akamai Technologies - Inverse >>>>>>>> 145 Broadway >>>>>>>> Cambridge, MA 02142 >>>>>>>> Connect with Us: <https://community.akamai.com/> >>>>>>>> <http://blogs.akamai.com/> >>>>>>>> <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!EcqHJUqV-wetV_DNm6yHnvvryi_qAFOdRAAcDbLbwCFp561F3FVPuGjCi8Wzbg$> >>>>>>>> >>>>>>>> <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!EcqHJUqV-wetV_DNm6yHnvvryi_qAFOdRAAcDbLbwCFp561F3FVPuGi5eEi6EA$> >>>>>>>> >>>>>>>> <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!EcqHJUqV-wetV_DNm6yHnvvryi_qAFOdRAAcDbLbwCFp561F3FVPuGjd3VOgFg$> >>>>>>>> >>>>>>>> <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!EcqHJUqV-wetV_DNm6yHnvvryi_qAFOdRAAcDbLbwCFp561F3FVPuGg54xdavA$> >>>>>>>> >>>>>>>>> On May 19, 2021, at 4:23 AM, Ezeh Victor via PacketFence-users >>>>>>>>> <packetfence-users@lists.sourceforge.net >>>>>>>>> <mailto:packetfence-users@lists.sourceforge.net>> wrote: >>>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> I have been having an issue using a third-party SSL certificate on PF >>>>>>>>> for the captive portal. >>>>>>>>> >>>>>>>>> Based on the documentation, the directive was to change the >>>>>>>>> server.crt and server.key files in the /usr/local/pf/conf/ssl/ folder. >>>>>>>>> >>>>>>>>> I generated the server.csr file using openssl req -new -newkey >>>>>>>>> rsa:2048 -nodes -keyout server.key -out server.csr. command >>>>>>>>> >>>>>>>>> I renamed the corresponding files to server.crt and server.pem and >>>>>>>>> copied them to the /usr/local/pf/conf/ssl/ folder and included the >>>>>>>>> server.key file generated during the server.csr generation. >>>>>>>>> >>>>>>>>> After doing this, I restarted the haproxy portal for the change to >>>>>>>>> take effect and it failed until I replace the server.pem file with >>>>>>>>> the original one. >>>>>>>>> >>>>>>>>> Please I need assistance with this. >>>>>>>>> >>>>>>>>> What am I missing? >>>>>>>>> _______________________________________________ >>>>>>>>> PacketFence-users mailing list >>>>>>>>> PacketFence-users@lists.sourceforge.net >>>>>>>>> <mailto:PacketFence-users@lists.sourceforge.net> >>>>>>>>> https://urldefense.com/v3/__https://lists.sourceforge.net/lists/listinfo/packetfence-users__;!!GjvTz_vk!C54N4JbJxSylz8oux_xKUlZBH1GUAKLr-30v-tBM_yic5PBVVZ9_bOER9HTRj4iI$ >>>>>>>>> >>>>>>>>> <https://urldefense.com/v3/__https://lists.sourceforge.net/lists/listinfo/packetfence-users__;!!GjvTz_vk!C54N4JbJxSylz8oux_xKUlZBH1GUAKLr-30v-tBM_yic5PBVVZ9_bOER9HTRj4iI$> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
